NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
The Folded-Steel Trowel: A V-Trough Blade From One Sheet
A thin flat trowel bends when you lever out a weed with tough roots; a thick one is heavy.
William B. Cleves of Binghamton, New York, received US 441,135, dated 25 November 1890 (filed 30 December 1889), for a trowel whose blade and shank are one sheet of metal "bent upon itself to form an angular longitudinally straight trough-shaped" blade. "Forming the blade and shank angularly, as described, greatly strengthens it and at the same time presents a long slim blade."
This rung works out how much stiffer a folded strip is than a flat one, then bends two strips of the same sheet, one flat and one folded, and loads them.
Trung cấp
About 2 hours
Hướng dẫn
1
1
Flat strip against folded strip
Flat strip against folded strip
Đang tải sổ tay Jupyter…
2
2
Why shape beats thickness
Why shape beats thickness
The embedded blueprint shows how the shape of a section, not only its material, sets its stiffness. Cleves folds a sheet to get it.
3
3
Read US 441,135
Read US 441,135
"This invention has for its object to construct a trowel especially adapted for digging weeds and for cultivating purposes, wherein a strong blade is desired for prying and twisting."
"Forming the blade and shank angularly, as described, greatly strengthens it and at the same time presents a long slim blade."
The trowel "is especially adapted for digging plantains and other weeds having fibrous roots of great strength, and the particular form preferably employed increases the strength and decreases the weight."
4
4
Bend a flat and a folded strip
Bend a flat and a folded strip
Cut two identical strips from steel sheet. Leave one flat. Clamp the other along its middle in the vise and fold it to a V.
Clamp each at one end so the same length sticks out. Hang a weight from the free end and measure how far it drops with the ruler. Compare the two with the notebook's ratio.
Then dig out a deep-rooted weed with the garden trowel and note where it bends.
Vật liệu cho bước này:
Tấm thép1 cáiCông cụ cần thiết:
Bay làm vườn
Kéo cắt tôn
Ê tô bàn nguội
Búa
Quả cân
Thước kẻ5
5
A trowel that bends, twists or snaps
A trowel that bends, twists or snaps
Trowel troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**William B. Cleves** of Binghamton, Broome County, New York, filed US 441,135 on 30 December 1889; it is dated 25 November 1890. The shank is driven into the handle and held by a pin.
**Honest limits.** The notebook treats the fold as sharp and the strip as uniform, and compares bending along the blade only. The strip size and angles are examples. Your measured deflections are the measurement.
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.