NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

The Oil-Moat Insect Guard: Up the Leg, Out the Flange, Down Into the Oil
Ants find food on a table by walking up its legs. A barrier on each leg can stop them before they reach the top.
Sterling Walter Conrad of Hanford, California, received US 460,429, dated 29 September 1891, for an insect-guard fitted round the leg of a table or the post of a house, "to prevent ants, mice, or rats and other vermin entering a house or house-safes or getting on a table or after suspended meat". A flange inside the casing turns climbing insects outward, and they walk down into a ring of oil.
This rung works out how much oil the moat holds, then builds a guard on a wooden post and tests it against an unguarded post on an ant trail.
Cơ bản
About 2 hours, then a day outdoors
Hướng dẫn
1
1
Oil in the moat
Oil in the moat
Đang tải sổ tay Jupyter…
2
2
A liquid that bars the way
A liquid that bars the way
The embedded blueprint uses a standing pool of water to stop gases coming up a drain. Conrad uses a standing ring of oil to stop insects coming up a leg.
3
3
Read US 460,429
Read US 460,429
"The object of the present invention is to provide a simple and inexpensive insect-trap adapted to be readily applied to the posts of houses, the legs of a table, or the like, to prevent ants, mice, or rats and other vermin entering a house or house-safes or getting on a table or after suspended meat."
"Ants or similar insects in attempting to ascend the leg or the post of a house will ascend the outer face of the tube 3 until they reach the horizontal flange 4, when they will pass to the sides of the casing 1 and descend into the annular space and drown in the oil or return. In either case the insect will be prevented passing up the leg farther than the horizontal flange."
4
4
Build a guard on a post and test it on an ant trail
Build a guard on a post and test it on an ant trail
Glue two dowels upright into holes drilled in two small boards: these are two table legs. Put a spoonful of sugar wetted with a little water on top of each.
Take a tin can with its top removed. Drill a hole in the centre of its bottom that fits the dowel closely. Turn the can upside down, so its bottom is the guard's top, and slide it down one dowel to halfway. Hot-glue it all round the hole so nothing can pass.
Cut a disk from the lid of a second can, about 1 cm smaller than the can, with a hole in its centre for the dowel. Slide it up inside the casing to halfway and glue it round the dowel: this is the flange. Cut a strip of tin 3 cm wide, bend it lengthways into an L, and hot-glue it inside the open rim to make a gutter. Drill a small hole in the top, pour cooking oil through it into the gutter, and seal the hole with tape.
Set both posts on an ant trail outdoors. Count the ants on each sugar after one hour, and again the next day.
Vật liệu cho bước này:
Lon thiếc2 cái
Chốt gỗ2 cái
Tấm ván gỗ phẳng2 cái
Dầu ăn60 ml
Đường hạt20 g
Băng dính vải1 cáiCông cụ cần thiết:
Hào chống kiến
Kéo cắt tôn
Máy khoan pin
Bộ mũi khoan
Súng bắn keo nóng
Thước kẻ
Bút dạ không xoá
Đồng hồ bấm giờ5
5
Ants that still reach the sugar
Ants that still reach the sugar
Insect guard troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Sterling Walter Conrad** of Hanford, California, filed US 460,429 on 8 January 1891; it is dated 29 September 1891. The patent names ants, mice and rats. This rung tests it on ants only.
**Honest limits.** The guard only works while nothing else touches the leg or the casing. The oil needs cleaning and topping up. The notebook's sizes are examples. Your ant counts, on the guarded and the unguarded post, are the measurement.
Vật liệu
6- 2 cáiTạm thời
- 2 cáiTạm thời
- 2 cáiTạm thời
- 60 mlTạm thời
- 20 gTạm thời
- 1 cáiTạm thời
Công cụ yêu cầu
8- Tạm thời
- Tạm thời
- 1 vendor sell this, none ship to you yetTạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.


