NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush
Woody

Tạo bởi

Woody

6. tháng Mười 2026NO
28
0
0
0
0

The Oil-Wick Fountain Brush: A Can Whose Wick Is the Brush

An oil can and a rag spill, and a brush dipped in oil drips. Preston H. Clingan of Florence, Colorado, received US 787,278, dated 11 April 1905, for "a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof": an open thimble hangs from the can's mouth to near its bottom, a rolled burlap wick inside it is frayed above the mouth into a brush, and oil in the chamber round the thimble reaches the wick from underneath. This rung works out how high a wick can lift oil, then builds the can from a jar, a tin and burlap and weighs the oil it lays on a board.
Cơ bản
About 2 hours

Hướng dẫn

1

How high the wick lifts

Đang tải sổ tay Jupyter…
2

A wick that feeds oil before it

The embedded blueprint feeds oil to a bearing through a wick. Clingan turns the wick's frayed end into the brush.
3

Read US 787,278

"My object is to provide a can of very simple form which is so constructed as to prevent the possibility of spilling the contents thereof. The can includes a wick of absorbent material, which is constantly supplied with oil or other fluid within the can."
4

Make the thimble

Remove both ends of a tin can that passes through the jar's mouth with 6 mm to spare. Cut it 10 mm shorter than the jar's inside height. File the cut edges.

Vật liệu cho bước này:

Lon thiếcLon thiếc1 cái

Công cụ cần thiết:

Kéo cắt tônKéo cắt tôn
Giũa (giũa tay)Giũa (giũa tay)
Thước kẻThước kẻ
Găng tay da bảo hộGăng tay da bảo hộ
5

Cut the lip ring

Cut an aluminium ring: outside to fit inside the jar's mouth, inside to fit round the thimble. Drill it 3 mm for a filling screw.

Vật liệu cho bước này:

Tấm nhômTấm nhôm1 cái

Công cụ cần thiết:

Kéo cắt tônKéo cắt tôn
Máy khoan pinMáy khoan pin
Bộ mũi khoanBộ mũi khoan
Giũa (giũa tay)Giũa (giũa tay)
6

Fix the thimble

Epoxy the ring round the thimble's top and into the jar's mouth, the thimble hanging 10 mm clear of the floor. Cut a rubber washer for the filling screw.

Vật liệu cho bước này:

Lọ thuỷ tinhLọ thuỷ tinh1 cái
Keo epoxy hai thành phầnKeo epoxy hai thành phần1 cái
Vít máyVít máy1 cái
Tấm cao suTấm cao su1 cái

Công cụ cần thiết:

Dao rọc thủ côngDao rọc thủ công
Bộ tua vítBộ tua vít
7

Roll the wick

Roll a strip of burlap tightly until it fills the thimble, 15 mm longer than it. Push it in and fray the top 15 mm with the fingers.

Vật liệu cho bước này:

Vải bố đayVải bố đay1 cái

Công cụ cần thiết:

KéoKéo
Thước kẻThước kẻ
8

The build in 3D

FreeCAD model of this build, not of the patent: a 90 mm jar with a 66 mm mouth, the aluminium lip ring and filling screw, a 53 mm thimble 10 mm off the floor, the burlap wick with its frayed top, and the lid.
Tệp thiết kếBLENDCC0 - Free
9

Oil a board and weigh it

Pour linseed oil through the filling hole to half the jar's height and wait until the wick's top darkens. Weigh a plywood board, brush it once over, and weigh it again. Turn the closed jar on its side over a rag for a minute.
Bước 9 - Image 1

Vật liệu cho bước này:

Dầu lanh đun chínDầu lanh đun chín1 cái
Tấm gỗ dánTấm gỗ dán1 cái
Giẻ bôngGiẻ bông1 cái

Công cụ cần thiết:

Cân nhà bếp điện tửCân nhà bếp điện tử
Đồng hồ bấm giờĐồng hồ bấm giờ
Thước dây cuộnThước dây cuộn
10

A wick that stays dry, floods or leaks

Oil-wick fountain brush troubleshooting.

Flow

Loading...
11

History and honest limits

**Preston H. Clingan** of Florence, Colorado, assignor of one-half to John H. Todd of Cañon City, filed US 787,278 on 28 July 1904; it is dated 11 April 1905. His can is cylindrical with both ends contracted and threaded, so the cover fits either end; the thimble is soldered to an inward lip at the mouth; the wick is preferably a roll of burlap. He named oiling or polishing surfaces and cleaning windows among its uses. **Honest limits.** A jar with one threaded mouth stands in for his can. The notebook assumes a fully wetting wick and one pore size. Your weights are the result.

Vật liệu

10

Công cụ yêu cầu

12

Tệp thiết kế

1

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...