NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip
YourGrandma

Tạo bởi

YourGrandma

7. tháng Mười 2026IS
47
0
0
0
0

Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip

Daniel E. True of Lake Village, New Hampshire, received US 18,165, dated 8 September 1857, for a rocking churn whose oval cistern has a "separator" of the same shape in its middle, so the cream flows in two currents that "come in direct collision from opposite directions, at each tip." This rung prints the cistern and the separator lid, builds the swing seat and makes butter.
Cơ bản
About 3 hours, plus printing

Hướng dẫn

1

His sizes at one third

Đang tải sổ tay Jupyter…
2

A rocking churn he names

True names McLaughlin's and Enoch Thomas's patents and does not claim their grates; he claims the separator.
3

Read US 18,165

"The operation being accomplished by oscillating the swing seat C, which gives to the cream cistern a successive tip motion, Fig. 1, red lines, thereby causing the cream to flow rapidly, being divided by the separator, into two separate currents in its passage, which come in contact at their terminus, alternately, whereby the cream receives a violent and peculiar action which causes a speedy union of the particles of butter into one mass."
4

Print the parts

Print the oval cistern (/uploads/blueprints/two-current-separator-rocking-churn-cistern.stl) and the lid with its separator (/uploads/blueprints/two-current-separator-rocking-churn-separator-lid.stl). The cistern needs a bed at least 210 mm long. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Vật liệu cho bước này:

Sợi in PETGSợi in PETG1 cái

Công cụ cần thiết:

Máy in 3D sợi nhựa (FDM)Máy in 3D sợi nhựa (FDM)
5

Frame and swing seat

Build a pine frame about 220 mm high and hang a pine seat between its uprights on a 10 mm rod, with two side strips that enter the cistern's guides. Hang a steel rod from the seat's middle with a stack of nuts as the pendulum weight.

Vật liệu cho bước này:

Ván thôngVán thông1 cái
Thanh thép mềmThanh thép mềm1 cái
Đai ốc lục giácĐai ốc lục giác6 cái
Vít gỗ #8 x 1"Vít gỗ #8 x 1"1 cái

Công cụ cần thiết:

Cưa tayCưa tay
Máy khoan pinMáy khoan pin
Bộ mũi khoanBộ mũi khoan
Bộ tua vítBộ tua vít
6

Corks

Plug the lid's two ventilators and the cistern's outlet with corks.

Vật liệu cho bước này:

Nút bầnNút bần3 cái
7

The patent drawing

US 18,165 drawing sheet, public domain (expired patent).
Bước 7 - Image 1
8

Rock and churn

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 600 ml and fit the lid with its separator. Rock the seat end to end steadily; time until the butter comes. Draw off the buttermilk at the outlet. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Vật liệu cho bước này:

Kem tươi béoKem tươi béo600 ml
Muối biển hạt thôMuối biển hạt thô1 cái
NướcNước1 cái

Công cụ cần thiết:

Nhiệt kế đầu dò cắm sẵnNhiệt kế đầu dò cắm sẵn
Đồng hồ bấm giờĐồng hồ bấm giờ
Cân nhà bếp điện tửCân nhà bếp điện tử
Tô trộn thép không gỉ (lớn)Tô trộn thép không gỉ (lớn)
9

Troubleshooting

Two-current churn troubleshooting.

Flow

Loading...
10

History and honest limits

**Daniel E. True** of Lake Village, Belknap County, New Hampshire, US 18,165, 8 September 1857. His frame was 2 feet high. He wrote that grate and perforated dashers were not new, naming Enoch Thomas's and John McLaughlin's patents, and claimed the separator in rocking churns. A printed cistern at one third of his size, pine and nuts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn.

Vật liệu

9

Công cụ yêu cầu

9

Bản thiết kế này làm ra

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...