NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Woodblock Playing Cards
Woody

Tạo bởi

Woody

27. tháng Bảy 2026NO
0
0
0
0
0

Woodblock Playing Cards

Before printing reached books, it reached cards. Between roughly 1418 and 1450 professional card makers in Ulm, Nuremberg and Augsburg were cutting relief blocks and printing decks on pasteboard, and playing cards competed with devotional images as the commonest use of the woodcut in that period.

The economics are the whole story. A hand-painted deck was a luxury object; a cut block prints a full sheet of cards as fast as you can ink it, and from about 1450 the colour went on through stencils rather than by brush. Cutting the block is a day's work that pays for itself on the second deck.

This is a relief printing job: everything you do not carve away prints. The design goes onto the block reversed, because the block prints a mirror of itself.

Trung cấp
6 hours

Hướng dẫn

1

Plan the sheet, not the card

Lay out a grid of card outlines on paper — nine or twelve cards to a sheet, each 60 x 90 mm with 6 mm gaps. Early cards were printed many to a sheet and cut apart afterwards, purely for economy.

Công cụ cần thiết:

Measuring RulerMeasuring Ruler
2

Surface the block flat

Sand a basswood or lino block dead flat and check it against a straightedge. Any dip prints as a pale patch, and you cannot press it out later.

Vật liệu cho bước này:

Basswood Carving BlockBasswood Carving Block1 cái

Công cụ cần thiết:

SandpaperSandpaper
3

Transfer the design reversed

Draw the design on thin paper, lay it face down on the block and rub it off, or trace it through carbon paper mirrored. Any text or number must be cut backwards or it prints backwards.

4

Ink the drawing in dark line

Go over the transferred lines with black ink so you can see what to keep. On the block, black is what survives; everything unmarked is waste.

5

Cut the outline with a V-tool

Cut a shallow V groove just outside every line you want to print, working around the line rather than into it. This isolates the printing lines before you clear anything.

Công cụ cần thiết:

Linoleum Carving Tool SetLinoleum Carving Tool Set
6

Clear the open areas with a gouge

Scoop out the large blank areas 2-3 mm deep with a U gouge. Shallow clearing picks up ink at the edges and prints grey smudges in the whites.

Công cụ cần thiết:

Wood GougeWood Gouge
7

Cut away from your hand, always

Keep the non-cutting hand behind the tool and clamp the block down. A gouge that slips travels the full length of the stroke.

8

Take a proof and correct

Ink the block and print one sheet on scrap. Broken lines, grey patches and missed clearings show up here and nowhere else. Recut and proof again.

Vật liệu cho bước này:

Block Printing InkBlock Printing Ink10 ml
9

Roll a thin even film of ink

Roll the ink out on a slab until it hisses, then charge the block in two directions. Thick ink fills the fine lines and turns the outline into a blob.

10

Print onto pasteboard

Lay the pasteboard on the inked block, hold it still, and burnish the back firmly with a spoon or baren, working in overlapping circles. Lift one corner to check before pulling the sheet.

Vật liệu cho bước này:

Card Stock (Heavy, 50 Sheets)Card Stock (Heavy, 50 Sheets)1 tờ
11

Dry the sheets flat

Interleave the printed sheets with clean paper and dry them under light weight, 24 hours for oil-based ink.

12

Cut one stencil per colour

Cut a stencil for each colour from oiled card or thin sheet, one colour at a time, using a printed sheet as the pattern. From about 1450 this is how woodcuts of every kind were coloured.

Công cụ cần thiết:

Craft KnifeCraft Knife
Self-Healing Cutting MatSelf-Healing Cutting Mat
13

Register the stencil to the print

Cut two notches in every stencil that line up with the same two marks printed on the sheet. Without registration marks each colour lands slightly off and the deck looks drunk.

14

Brush colour through the stencil

Hold the stencil down flat and work colour through it with a stiff, nearly dry brush, sweeping across the openings. A wet brush creeps under the edge and blurs the shape.

Vật liệu cho bước này:

Acrylic Paint SetAcrylic Paint Set1 bộ

Công cụ cần thiết:

Paintbrush SetPaintbrush Set
15

Cut the cards apart

Cut the sheet down the gaps with a straightedge and knife. Cut the long axis first on every sheet so any drift stays consistent across the deck.

Công cụ cần thiết:

Metal Ruler (30cm)Metal Ruler (30cm)
16

Burnish and wax the faces

Burnish each card and rub a trace of beeswax over the face. Slick cards slide against each other; unwaxed pasteboard drags and will not shuffle.

Vật liệu cho bước này:

BeeswaxBeeswax5 g
17

History & Context

Cards arrive, then printing arrives. Playing cards reached Europe in the late fourteenth century. Hand-painted decks survive from the fifteenth century as luxury objects, but no printed cards are known from before the 1420s. From roughly 1418 to 1450 professional card makers working in Ulm, Nuremberg and Augsburg were producing printed decks, and cards rivalled devotional prints as the most common product of the early woodcut.

Block, then engraving, then stencil. The images were drawn by hand, cut in relief on woodblocks, or — for the finest work — printed from copper engravings. Colour was applied by hand at first and by stencil from about 1450 onward. Each of those steps cut the labour per deck, and each one widened the market.

Pasteboard underneath. The stock was laminated pasteboard of three to six sheets. Stiffness let a card be dealt and shuffled; opacity stopped it being read from the back. The material is a blueprint in its own right and predates printing on it by a long way.

What we do not know. Surviving early decks are fragmentary — many known only from uncut proof sheets and from cards recycled as binding waste inside book covers, which is where a great deal of early printing survives at all. The suit systems now called German, Latin and French took shape over the fifteenth century, with the French pattern of hearts, tiles, clovers and pikes appearing around 1480 and winning out largely because its flat single-colour shapes could be stencilled in a couple of strokes. The design that survived was the one that was cheapest to colour.

Diderot, and a caution. Much of the detailed technical description of card making that gets quoted for the medieval period actually comes from Diderot's Encyclopédie in the eighteenth century. It describes a mature trade three centuries later than the first printed cards, and should not be read back onto them as if it were contemporary evidence.

Vật liệu

5

Công cụ yêu cầu

8

Vật liệu bản thiết kế liên kết

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...