NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Woodcut
Pixel

Tạo bởi

Pixel

20. tháng Tám 2026FI
0
0
0
0
0

Woodcut

The oldest way of printing a picture, and the only one where you carve away everything you do not want. What remains standing takes the ink and prints; what you cut out prints white. That single inversion governs every decision — you are not drawing lines, you are drawing the shoulders on either side of a line, and every mark is made backwards because the block prints in mirror image. Because the printing surface is raised, a woodcut can be locked into a forme alongside movable type and printed in the same pass, which is exactly why illustrated books from the fifteenth century onward are illustrated with woodcuts and not with engravings.
Trung cấp
2 hours

Hướng dẫn

1

Draw in reverse, and think in shoulders

Two mental inversions, and both catch people out.

  1. Draw your design, then trace it and flip it — the block must carry a mirror image.
  2. Shade everything that will print BLACK.
  3. Recognise that a printed line is a ridge you leave standing, with a cut on each side.
Text is the merciless test: any lettering must be cut in mirror image or it prints backwards. Cutting a line means removing wood from both sides of it, so a fine line is a fragile ridge — which is why early woodcut has bold outlines and cross-hatching is rare.

Vật liệu cho bước này:

Graphite Pencil SetGraphite Pencil Set1 bộ
2

Cut with the grain in mind

A woodcut uses a plank cut along the grain, and the grain fights you.

  1. Outline every shape first with a fine V-tool, cutting just outside your drawn line.
  2. Clear the open areas with a wider gouge.
  3. Always cut AWAY from your body and keep the free hand behind the blade.
Cutting across the grain tears rather than slices, and a ridge running across the grain snaps off under the press. Traditional cutters worked the block round rather than forcing an awkward direction — turn the wood, not the wrist.

Vật liệu cho bước này:

Basswood Carving BlockBasswood Carving Block1 block
Carving Mallet (Lignum Vitae)Carving Mallet (Lignum Vitae)1 cái
3

Ink the surface only

A roller charges the raised areas and must not reach the floor of the cuts.

  1. Roll ink out thinly on a flat slab until it hisses slightly.
  2. Charge a soft roller and roll across the block in several directions.
  3. Inspect at a low angle — the cut areas must stay clean.
Too much ink fills the cuts and prints a grey mush; too little gives a patchy, starved image. Thin and even, built up in passes, is the rule — and this is precisely the opposite of intaglio, where ink is forced INTO the recesses and wiped off the surface.

Vật liệu cho bước này:

Block Printing InkBlock Printing Ink1 tube
4

Print with a baren and pull a proof

Hand pressure, worked evenly, then judge and re-cut.

  1. Lay paper on the inked block and hold it still.
  2. Burnish the back with a baren in small circles, working over the whole area.
  3. Peel a corner to check before lifting; pull the proof and study it.
Proof, correct, proof again. You can always cut more away and you can never put wood back — so work from bold toward fine, and stop one step before you think you should.

Vật liệu cho bước này:

Baren (burnishing pad)Baren (burnishing pad)1 cái
5

History and context

Woodblock printing on textiles is ancient, and printing on paper is established in China by the Tang dynasty — the Diamond Sutra of 868 is a dated, printed, illustrated book. Europe takes it up in the early fifteenth century for playing cards and devotional images, before Gutenberg.

The technical reason woodcut dominated book illustration is relief height. Type is relief; a woodcut is relief; both can be locked into the same forme and printed together in one pull. Copper engraving is intaglio, needs a completely different press and a separate pass, and therefore appears as separate plates bound in — more expensive, and usually reserved for prestige books.

Wood engraving is a different craft with a confusingly similar name. Thomas Bewick perfected it in the late eighteenth century by working on the END grain of boxwood with an engraver's burin rather than the plank grain with a knife. End grain has no direction to tear, so it takes extremely fine lines and holds up for enormous print runs — which made the illustrated newspapers and magazines of the nineteenth century possible.

Japanese ukiyo-e took the medium furthest as colour printing, with a separate block for each colour and registration marks — the kentō — cut into every block so the sheets align. Hokusai's wave is a woodcut, printed from several blocks in careful register, and it is worth knowing that the carver and the printer were usually different people from the artist.

Vật liệu

5

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...