NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Woven Wire Cloth on a Wire Loom
Emma

Tạo bởi

Emma

11. tháng Mười 2026SE
7
0
0
0
0

Woven Wire Cloth on a Wire Loom

Wire mesh, or wire gauze, is cloth woven from metal wire on a loom much like a textile loom. Warp wires run the length of the cloth; a shuttle, or in later looms sliding carriers, takes the weft wire across through the shed, and the lathe (beater) knocks it up to the fell of the cloth, twice in hand weaving. Fine wire is soft and easily kinked, so the shed is kept low to avoid straining the warp. Mesh is named by its count, historically the number of openings per inch.
Nâng cao
Factory process

Hướng dẫn

1

Warp the loom

Set the warp wires side by side at the spacing for the mesh count.

Vật liệu cho bước này:

Dây thép không gỉDây thép không gỉ1 as required

Công cụ cần thiết:

Khung dệt lưới thépKhung dệt lưới thép
2

Open a low shed

Lift and lower alternate warp wires to open a shed, kept low so the warp is not strained.

Công cụ cần thiết:

Khung dệt lưới thépKhung dệt lưới thép
3

Pass the weft

Carry the weft wire across through the shed with the shuttle.

Công cụ cần thiết:

Khung dệt lưới thépKhung dệt lưới thép
4

Beat up

Bring the lathe forward to beat the weft wire up to the fell; repeat shed, weft and beat for every wire.

Công cụ cần thiết:

Khung dệt lưới thépKhung dệt lưới thép

Vật liệu

1

Công cụ yêu cầu

1

Blueprint liên quan

Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...