NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Wool Cloth Woven in Plain Weave on a Rigid Heddle Loom
Plain weave is the most basic weave: each weft thread goes over one warp thread and under the next. Woven from undyed wool yarn, the cloth comes off the loom loose and soft, still oily and unshrunk; fulling cleans and thickens it afterwards.
The picture: plain weave seen close up.
Cơ bản
A few days
Hướng dẫn
1
1
Warp the loom
Warp the loom
Measure the warp (step 5), tie it to the front roller, and thread one end through each slot and each hole of the heddle. Wind it on the back roller under even tension.
Vật liệu cho bước này:
Sợi dọc320 mCông cụ cần thiết:
Khung cửi go cứng
Thước kẻ
Vam chữ C
Kéo2
2
Weave
Weave
Lift the heddle, pass the shuttle through, lower the heddle and pass it back, beating each pick in lightly with the heddle. Lay the weft in at a slant so the edges do not draw in.
Vật liệu cho bước này:
Sợi ngang265 mCông cụ cần thiết:
Khung cửi go cứng
Con thoi3
3
Advance and keep going
Advance and keep going
Wind the woven cloth onto the front roller as you go, keeping the beat even so the cloth has the same number of picks per cm all along.
Công cụ cần thiết:
Khung cửi go cứng
Thước kẻ4
4
Cut off
Cut off
Weave to the end of the warp, cut the cloth off, and knot the warp ends in groups so the weft cannot unravel. It is now loom-state cloth, ready for fulling.
Công cụ cần thiết:
Kéo5
5
Yarn for the cloth
Yarn for the cloth
Đang tải sổ tay Jupyter…
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.




