NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

Writing Paper: Rag Sheets Sized and Hot-Pressed Smooth
A pen needs paper that does not let ink spread: sized, so the ink stays on top, and smooth, so the nib does not catch. Andrew Ure (1839) gives both: hand-made rag sheets dipped in gelatine size, then hot-pressed between smooth pasteboards and heated iron plates, "which communicates a fine smooth surface to writing-paper".
The picture: the drying loft of an 18th-century paper mill, sheets hung on lines (Diderot's Encyclopédie).
Trung cấp
About a week with drying
Hướng dẫn
1
1
Size the sheets
Size the sheets
Melt hide glue in water with a little alum to a thin, warm size. Spread a few dry, unsized rag sheets in it at a time so each is wetted evenly.
Vật liệu cho bước này:
Giấy50 tờ
Keo da động vật100 g
Phèn chua (phèn kali)10 g
Nước2 lítCông cụ cần thiết:
Ấm gang
Bồn2
2
Press and dry slowly
Press and dry slowly
Press out the spare size between felts, part the sheets, press again and hang them to dry slowly (Ure allowed three days).
Công cụ cần thiết:
Tấm nỉ len
Máy ép giấy (kiểu ép sách)
Dây phơi3
3
Hot-press
Hot-press
Stack the dry sheets, each between two smooth pasteboards, with a heated iron plate in the pile, and press it hard. The heat and pressure give the smooth writing surface.
Công cụ cần thiết:
Bìa bồi
Tấm sắt
Bếp điện phẳng
Máy ép giấy (kiểu ép sách)Vật liệu
4- 50 tờTạm thời
- 100 gTạm thời
- Tạm thời
- 2 lítTạm thời
Bản thiết kế này làm ra
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.



