NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Zoetrope
Penny

Tạo bởi

Penny

27. tháng Bảy 2026DK
1
0
0
1
0

Zoetrope

A thaumatrope alternates two pictures. A zoetrope runs a whole sequence — and it solves the problem that stops a simple spinning strip from working at all: if you just spin a ring of drawings, you see a smear.

The fix is a shutter. Cut a slit above every picture and the eye gets a series of brief, separate glimpses instead of a continuous blur. Each slit passes your eye at the moment the picture behind it is in the same place the last one was, so the images stack up in one spot and the figure moves.

That is the whole invention, and the arithmetic behind it is worth doing yourself: as many slits as pictures. Change that ratio deliberately and you can make the figure drift forward or backward round the drum — the same effect that makes wagon wheels appear to spin backward on film.

Cơ bản
2 hours

Hướng dẫn

1

Cut a card strip 950 mm long

Cut a strip of heavy card 950 x 200 mm. Rolled into a cylinder that gives a drum about 300 mm across — big enough for drawings you can actually see.

Vật liệu cho bước này:

Card Stock (Heavy, 50 Sheets)Card Stock (Heavy, 50 Sheets)2 tờ

Công cụ cần thiết:

Metal Ruler (30cm)Metal Ruler (30cm)
2

Divide the strip into 12 equal parts

Mark 12 divisions of 79 mm along the strip. Twelve is a good working number — enough frames for smooth motion, few enough to draw in an afternoon.

3

Cut one slit per division

Cut a slit 3 mm wide and 50 mm tall at each of the 12 marks, in the upper half of the strip. Narrow slits give a sharper image and a darker one; wide slits are bright and smeared.

Công cụ cần thiết:

Craft KnifeCraft Knife
Self-Healing Cutting MatSelf-Healing Cutting Mat
4

Form the drum and join the ends

Roll the strip into a cylinder with the slits at the top and join the overlap. Keep it round — an oval drum changes the viewing distance as it spins and the image breathes in and out.

5

Cut a base disc and fix the drum to it

Cut a disc to match the drum diameter and glue the cylinder onto its rim. The base carries the drum and the bearing.

Vật liệu cho bước này:

PVA Wood GluePVA Wood Glue10 ml
6

Fit a free-running spindle

Fit a dowel through the centre of the base into a block, or drop the base onto a lazy-Susan bearing. It must spin freely for several seconds after one push — friction is what limits your usable speed range.

Vật liệu cho bước này:

Dowel RodDowel Rod1 cái
7

Balance the drum

Spin it and watch for wobble; shim the base until it runs true. A wobbling drum shifts the slits vertically and the image jumps.

8

Draw a 12-frame sequence on a paper strip

Cut a paper strip to sit inside the drum below the slits and divide it into the same 12 spaces. Draw one phase of a cycle in each — a bouncing ball is the easiest first sequence.

Vật liệu cho bước này:

Watercolour PaperWatercolour Paper1 tờ
9

Make the motion loop

Make frame 12 lead back into frame 1. The drum has no beginning, so any sequence that does not close shows a visible jolt once per revolution.

10

Load the strip and look through the slits

Drop the strip inside against the wall, spin the drum and look through the slits at the far side. Look through, never over — the whole effect depends on the slit acting as a shutter.

11

Measure the frame rate

Time ten revolutions with a stopwatch and divide. Twelve slits per turn means images per second is twelve times revolutions per second — find the speed at which the motion looks smooth and write the number down.

Công cụ cần thiết:

StopwatchStopwatch
12

Slow it down to find the flicker threshold

Let it slow until the motion breaks into separate flashes and note that rate too. Between those two numbers is the working range of every projected moving image ever made.

13

Break the ratio on purpose

Now load a strip with 11 or 13 drawings into the 12-slit drum. The figure creeps slowly round the drum instead of staying put, because each glimpse arrives slightly out of register with the last. That is stroboscopic drift — the same effect as backward-turning wheels in film.

14

Test what the slit width costs you

Make a second drum with 6 mm slits and compare. Wider slits let in more light and more movement during the exposure, so the picture is brighter and blurrier. Every shutter since has traded the same two things against each other.

15

History & Context

Horner, 1833. The Bristol mathematician William George Horner devised the slitted drum and called it the Daedalum. His version put the viewing slits between the pictures rather than on a band above them, which meant the images could not simply be swapped for a new strip. It sold almost not at all.

The name and the success came thirty years later. Peter Desvignes patented and demonstrated a version in Britain in 1860. In the United States William Ensign Lincoln — a Brown University undergraduate, about eighteen years old — devised the definitive form with the slits on a band above the pictures, so strips became interchangeable. He assigned it to the toy makers Milton Bradley and was granted his patent in April 1867. It became a mass-market toy on both sides of the Atlantic almost immediately. The invention that mattered commercially was not the drum, it was the replaceable strip.

The Chinese claim, honestly stated. The inventor Ding Huan is recorded in second-century China as having made a device in which painted vanes turned on rising heat from a lamp. It is often presented as the first zoetrope. It is not clear from the sources whether it produced any illusion of animation at all, or simply spun physical figures around — and the honest position is that we do not know. Rotating lamp-driven figures are a real Chinese tradition; a working animation device in 180 AD is a much larger claim than the evidence supports.

Where it leads. The zoetrope is the phenakistoscope's descendant and the praxinoscope's ancestor — Émile Reynaud replaced the slits with a ring of mirrors in 1877, recovering the light the slits threw away. The line runs directly to the film projector, which is a zoetrope with a lamp behind the strip and a shutter in place of the slit.

Vật liệu

4

Công cụ yêu cầu

4

Vật liệu bản thiết kế liên kết

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...