UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Jump Wires for a Solderless Breadboard
Jump wires connect the points of a solderless breadboard. Ready-made sets exist, some with small plugs on the ends, but plain jump wires are easy to make. Use 22 AWG (0.33 mm²) solid, tin-plated copper wire and strip 3/16 to 5/16 inch (about 5–8 mm) of insulation from each end: shorter ends may not reach the board's spring clips properly.
Oqalayo
30 minutes
Imiyalelo
1
1
Cut lengths
Cut lengths
Cut the hookup wire into the lengths you need.
Izinto zokwakha zalesi sinyathelo:
Ucingo lokuxhuma2 mAmathuluzi adingekayo:
Impinsi yokusika ucingo ehlangothini
Irula2
2
Strip the ends
Strip the ends
Strip 3/16 to 5/16 inch (5–8 mm) of insulation from both ends of each piece.
Amathuluzi adingekayo:
Isihlubuli sikawayaIzinto
1- Isibambeli
Amathuluzi Adingekayo
3- Isibambeli
- Isibambeli
- Isibambeli
Le blueprint yenza
Ama-blueprint ahlobene
Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.