UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Cookware Handles: Stainless Loops on Flanges Drilled for Rivets
Youblob · CC0
Forge

Yenziwe ngu-

Forge

19. uMfumfu 2026NO
11
0
0
0
0

Cookware Handles: Stainless Loops on Flanges Drilled for Rivets

Pot handles are often riveted on: the handle has a flange with a pattern of holes, bevelled on the side against the pot, so the rivets spread into the bevel and lock the handle to the pot (US 7,966,710). These are a pair of loop handles bent from stainless rod and riveted to stainless flange plates, ready to rivet to a pot. Design and sizes are ours. The picture: our drawing.
Ophakathi
Half a day

Imiyalelo

1

Cut the flanges

Cut two flange plates 70 × 35 mm from 2 mm stainless sheet and curve each slightly to fit the pot's side wall. Drill each with three holes for the pot rivets, countersunk on the face that will sit against the pot, and two plain holes for fixing the loop.

Izinto zokwakha zalesi sinyathelo:

Ishidi lensimbi engagqwaliIshidi lensimbi engagqwali1 ucezu

Amathuluzi adingekayo:

Isikeli sensimbiIsikeli sensimbi
Isaha SensimbiIsaha Sensimbi
Isibambo SebhentshiIsibambo Sebhentshi
Ibhola ElimileIbhola Elimile
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Isethi Yamabhithi E-CountersinkIsethi Yamabhithi E-Countersink
Uwoyela wokusikaUwoyela wokusika
Iqoqo LamafayelaIqoqo Lamafayela
Izibuko zokuphephaIzibuko zokuphepha
2

Bend the loops

Cut two 180 mm lengths of 8 mm stainless rod. Heat the ends red and flatten them on the anvil into tabs, then bend each rod into a loop that stands clear of the pot wall by a hand's thickness.

Izinto zokwakha zalesi sinyathelo:

Insimbi engagqwali eyindukwanaInsimbi engagqwali eyindukwana400 mm

Amathuluzi adingekayo:

Isaha SensimbiIsaha Sensimbi
Iziko lomkhandi wensimbiIziko lomkhandi wensimbi
Insimbi YokukhandelaInsimbi Yokukhandela
Isando esinekhanda elimise okwesikhonkwaneIsando esinekhanda elimise okwesikhonkwane
Udlawu lomkhandi wensimbiUdlawu lomkhandi wensimbi
Isibambo SebhentshiIsibambo Sebhentshi
Amagilavu okushiselaAmagilavu okushisela
3

Drill and rivet the loops

Drill the flattened tabs to match the two plain holes and rivet each loop to the outer face of its flange. The three countersunk holes are left for riveting the handle to the pot.

Izinto zokwakha zalesi sinyathelo:

Izipikili zensimbiIzipikili zensimbi4 izicucu

Amathuluzi adingekayo:

Ibhola ElimileIbhola Elimile
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Insimbi YokukhandelaInsimbi Yokukhandela
Isando esinekhanda elimise okwesikhonkwaneIsando esinekhanda elimise okwesikhonkwane
Izibuko zokuphephaIzibuko zokuphepha
4

Finish

File all edges smooth so nothing catches the hand, and check both handles sit flat on the pot wall.

Amathuluzi adingekayo:

Iqoqo LamafayelaIqoqo Lamafayela
I-Caliper Yedijithali Yamayintshi Ayi-6I-Caliper Yedijithali Yamayintshi Ayi-6

Izinto

3

Amathuluzi Adingekayo

15

Le blueprint yenza

Thumbnail
Isibambeli

Izibambo zezitsha zokupheka

Free

37
0
1

Ama-blueprint ahlobene

Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso

Stainless Stock Pot: Deep Drawn with a Bonded Base

Stainless Stock Pot: Deep Drawn with a Bonded Base

ngu-EmmaSE

Umsebenzi Wensimbi

35
0
0
0
0
0

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...