Ukusebenzisana
UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Fast-and-Loose Bucket Churn: One Way the Buckets Cross to Churn, the Other They Close to Gather
English
Millie

Yenziwe ngu-

Millie

7. uMfumfu 2026NL
39
0
0
0
0

Fast-and-Loose Bucket Churn: One Way the Buckets Cross to Churn, the Other They Close to Gather

Franklin Thorpe of Shelbyville, Illinois, received US 15,787, dated 23 September 1856, for a dasher of a fast bucket and a loose one on a screw: turned one way they cross and squirt the milk against the tub's ends; turned back, the loose one screws up "tightly against the other" in line, to gather the butter. This rung prints both buckets and the bushings, builds the churn on a threaded rod and makes butter.
Ophakathi
About 3 hours, plus printing

Imiyalelo

1

A quarter turn on a screw

Ilayisha incwadi ye-Jupyter…
2

A dasher that changes when reversed, before it

Davis's sections fold on pins; Thorpe's loose bucket on a screw.
3

Read US 15,787

"The loose bucket working by its nut on the left hand screw on the spindle brings the end of the said bucket tightly against the other as they get into line."
4

Print the parts

Print the fast bucket, the loose bucket with its nut slot and two bushings. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Izinto zokwakha zalesi sinyathelo:

Ifilamenti ye-PETGIfilamenti ye-PETG1 ucezu

Amathuluzi adingekayo:

Iphrinta ye-3D yentambo (i-FDM)Iphrinta ye-3D yentambo (i-FDM)
5

Print the fast bucket

The fast bucket, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
6

Print the loose bucket

The loose bucket, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
7

Print the bushing

The bushing, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
8

Spindle and buckets

Press an M10 nut into each end trap of the fast bucket and screw it onto an M10 stainless threaded rod near one end, locked. Drop an M10 nut into the loose bucket's slot and screw it on beside the fast one. Fit a short pin in the fast bucket's hole so the loose bucket's lug can turn only a quarter turn.

Izinto zokwakha zalesi sinyathelo:

Insika enemicu yesikulufuInsika enemicu yesikulufu1 ucezu
Inathi Yezinhlangothi EziyisithuphaInathi Yezinhlangothi Eziyisithupha3 izicucu
Ubhamu Oluyindilinga Lwensimbi EthambileUbhamu Oluyindilinga Lwensimbi Ethambile1 ucezu
I-epoxy Yezingxenye EzimbiliI-epoxy Yezingxenye Ezimbili1 ucezu

Amathuluzi adingekayo:

Isipanela esilungisekayoIsipanela esilungisekayo
Isaha SensimbiIsaha Sensimbi
9

Tub and crank

Lay a round food-grade container about 180 mm across on its side in a pine cradle and cut a lid opening in its top. Seal a bushing in each end on the axis, pass the rod through, and fit a pine crank arm and handle with nuts.

Izinto zokwakha zalesi sinyathelo:

Isitsha sokugcina sezinga lokudlaIsitsha sokugcina sezinga lokudla1 ucezu
Isivalo Se-siliconeIsivalo Se-silicone1 ucezu
Ipulangwe lomphayiniIpulangwe lomphayini1 ucezu
Izikhonkwane zokhuni oluqinileIzikhonkwane zokhuni oluqinile1 ucezu
Inathi Yezinhlangothi EziyisithuphaInathi Yezinhlangothi Eziyisithupha2 izicucu

Amathuluzi adingekayo:

Ibhola ElingenantamboIbhola Elingenantambo
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Isaha Se-CopingIsaha Se-Coping
Isipanela esilungisekayoIsipanela esilungisekayo
10

The build in 3D

FreeCAD model of this build: the half-round tub cut open, the threaded rod with the fast bucket and the loose bucket turned across it, and the crank.
Ifayela LomklamoBLENDCC0 - Free
11

Churn one way, gather the other

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Turn the crank the way that opens the loose bucket across the fast one; time until the butter comes. Turn it back so the buckets close in line and roll the butter together. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Isinyathelo 11 - Image 1

Izinto zokwakha zalesi sinyathelo:

Ukhilimu ojiyileUkhilimu ojiyile1500 ml
Usawoti Wolwandle OmkhuluUsawoti Wolwandle Omkhulu1 ucezu
AmanziAmanzi1 ucezu

Amathuluzi adingekayo:

Ithemomitha enenaliti eshiywa ngaphakathiIthemomitha enenaliti eshiywa ngaphakathi
Iwashi Lokumisa IsikhathiIwashi Lokumisa Isikhathi
Isikali Sedijithali SasekhishiniIsikali Sedijithali Sasekhishini
Isitsha esikhulu sokuxuba sensimbi engagqwaliIsitsha esikhulu sokuxuba sensimbi engagqwali
12

Troubleshooting

Fast-and-loose bucket troubleshooting.

Flow

Loading...
13

History and honest limits

**Franklin Thorpe** of Shelbyville, Shelby County, Illinois, US 15,787, 23 September 1856. He claimed the fast and loose buckets, the loose one slackened and tightened by "the screw upon the spindle; or equivalent devices." His screw was left-handed; a common right-hand M10 rod simply swaps which way of the crank churns and which gathers. A container, a threaded rod and printed parts stand in for his tub and spindle. FDM prints hold food in their layer lines, so wash well and replace when worn.

Izinto

12

Amathuluzi Adingekayo

10

Amafayela omklamo

4

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...