Ukusebenzisana
UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO

English
Piston-Float Air Churn: Hollow Floats With Pistons Worked by a Fixed Eccentric
Egbert wanted the air "forcibly discharged in small jets at the very point where it is most required, viz, the moving surface of the dasher."
D. N. Egbert of Hudson, Ohio, received US 6,727, dated 18 September 1849, for a rotary churn-dasher in a case with a zinc bottom: two sets of arms joined by hollow floats whose sides are pierced with small holes, each fitted with a piston. Connecting rods join the pistons to an eccentric ring running on an eccentric fixed to the end piece, so each float fills with air as it ascends and discharges it as it descends. A strap from a large pulley on the crank shaft to a small one on the dasher's shaft turns it fast.
This rung works out the air each float pumps, then prints the floats, pistons, eccentric and arms, builds them over a stainless bottom, and makes butter.
Osezingeni eliphezulu
About 6 hours, plus printing
Imiyalelo
1
1
Air per float
Air per float
Ilayisha incwadi ye-Jupyter…
2
2
A dasher that is also an air pump before it
A dasher that is also an air pump before it
The embedded blueprint pumps air with a tube over a loose plunger. Egbert builds the pump into each float of a rotary dasher.
3
3
Read US 6,727
Read US 6,727
"It will now be perceived that as the floats ascend above their horizontal position by the revolution of the dasher, each piston is in turn withdrawn in its appropriate float and the hollow cavity filled with air; as the floats descend below their horizontal position this air is forcibly discharged through the perforations of the floats, below the surface of the liquid."
4
4
Print the parts
Print the parts
Print two hollow floats and two pistons, the fixed eccentric and its ring, two arm sets and the crank arm. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Izinto zokwakha zalesi sinyathelo:
Ifilamenti ye-PETG1 ucezuAmathuluzi adingekayo:
Iphrinta ye-3D yentambo (i-FDM)5
5
Print the hollow float
Print the hollow float
The hollow float, printed as step 4 describes.
6
6
Print the piston
7
7
Print the eccentric
Print the eccentric
The eccentric, printed as step 4 describes.
8
8
Print the eccentric's ring
Print the eccentric's ring
The eccentric's ring, printed as step 4 describes.
9
9
Print the arm sets
Print the arm sets
The arm sets, printed as step 4 describes.
10
10
Print the crank arm
Print the crank arm
The crank arm, printed as step 4 describes.
11
11
The case
The case
Make two plywood end pieces with a 90 mm radius half circle grooved in each, and bend a 0.5 mm stainless sheet into the bottom, seated in the grooves with silicone, as his zinc bottom. Screw the eccentric to the inside of one end on the axis, offset upward as printed.
Izinto zokwakha zalesi sinyathelo:
Ishidi le-plywood1 ucezu
Ishidi lensimbi engagqwali - 3041 ucezu
Isikulufo sokhuni #8 x 1"1 ucezuAmathuluzi adingekayo:
Isaha Se-Coping
Isikeli sensimbi
Ithuluzi lokususa amabhadi
Isando serabha
Isethi yezikulufudrayiva12
12
Dasher, pistons and rods
Dasher, pistons and rods
Slide the two arm sets onto a 10 mm square hardwood shaft and screw a float to the ends of each pair of arms, holes outward. Fit a piston in each float. Fit the ring over the eccentric and join each piston to the ring with two thin pine rods on M3 screws, so the ring is carried round by the arms. Pass the shaft through the other end and glue the crank arm and handle on.
Izinto zokwakha zalesi sinyathelo:
Izikhonkwane zokhuni oluqinile1 ucezu
Ipulangwe lomphayini1 ucezu
Izikulufu zomshini1 ucezu
Inathi Yezinhlangothi Eziyisithupha1 ucezu
Iglu Lokhuni1 ucezuAmathuluzi adingekayo:
Isaha Sesandla
Ibhola Elingenantambo
Iqoqo Lamakhanda Ebhola
Isethi yezikulufudrayiva13
13
The patent drawing
The patent drawing
US 6,727 drawing sheet, public domain (expired patent).

14
14
Crank and make butter
Crank and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank steadily and watch for jets of bubbles as each float goes down; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Izinto zokwakha zalesi sinyathelo:
Ukhilimu ojiyile1500 ml
Usawoti Wolwandle Omkhulu1 ucezu
Amanzi1 ucezuAmathuluzi adingekayo:
Ithemomitha enenaliti eshiywa ngaphakathi
Iwashi Lokumisa Isikhathi
Isikali Sedijithali Sasekhishini
Isitsha esikhulu sokuxuba sensimbi engagqwali15
15
Pistons that stick, no jets
Pistons that stick, no jets
Piston-float air churn troubleshooting.
Flow
Loading...
16
16
History and honest limits
History and honest limits
**D. N. Egbert** of Hudson, Summit County, Ohio, received US 6,727, dated 18 September 1849. A tightening pulley on a spring lever kept the strap taut. He claimed the combination of the pistons moved by stationary eccentrics with the floats of a revolving dasher.
**Honest limits.** Our crank turns the shaft directly, without his strap and pulleys; stainless sheet and printed parts stand in for his zinc and wooden floats. The notebook gives an upper bound. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Izinto
13- 1 ucezuIsibambeli
- 1 ucezuIsibambeli
- Isibambeli
- 1 ucezuIsibambeli
- 1 ucezuIsibambeli
- Isibambeli
- 1 ucezuIsibambeli
- 1 ucezuIsibambeli
- Isibambeli
- 1 ucezuIsibambeli
- 1500 mlIsibambeli
- 1 ucezuIsibambeli
- 1 ucezuIsibambeli
Amathuluzi Adingekayo
13- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- 1 vendor sell this, none ship to you yetIsibambeli
- Isibambeli
- Isibambeli
- Isibambeli
Amafayela omklamo
6Le blueprint yenza
Ama-blueprint ahlobene
Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso

Air-Pump Tube Dasher: A Tube Over a Loose Plunger Pumps Air at Every Stroke
ngu-Emma
UKUDLA NEZIPHUZO
33
0
0
0
0
0

Air-Pump Annular Dasher Churn: A Pump in the Middle, a Ring Dasher Round It
ngu-Martin
UKUDLA NEZIPHUZO
35
0
0
0
0
0

Water-Jacketed Churn: Hot or Cold Water Under a Metal Plate Tempers the Cream
ngu-Karen
UKUDLA NEZIPHUZO
38
0
0
0
0
0
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.
