UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Printed Protractor on Pasteboard
Mark

Yenziwe ngu-

Mark

11. uMfumfu 2026FI
44
0
0
0
0

Printed Protractor on Pasteboard

A protractor is a half circle divided into 180 degrees. Drawn in millimetres on an A4 page with an 80 mm radius, every degree mark is about 1.4 mm apart, enough to read to a degree. Printed at actual size and glued to stiff pasteboard, it measures as well as a shop one for paper and wood work. A 100 mm check line on the sheet catches a printer that shrinks the page. Download: /uploads/blueprints/protractor-a4-180.pdf
Oqalayo
45 minutes

Imiyalelo

1

Print at actual size

Download the protractor sheet and print it with 'Actual size' (100 %), never 'Fit to page'. Measure the check line: it must be 100 mm.

Izinto zokwakha zalesi sinyathelo:

IphephaIphepha1 ishidi

Amathuluzi adingekayo:

Ikhompyutha YasetafuleniIkhompyutha Yasetafuleni
Iphrinta efafaza uyinkiIphrinta efafaza uyinki
IrulaIrula
2

Download the protractor sheet

The protractor sheet, used as step 1 describes.
Ifayela LomklamoPDFCC0 - Free
3

Why actual size matters

Printing a measuring sheet so it stays true.
4

Glue to pasteboard

Brush warm hide glue thinly over a piece of pasteboard, lay the print on it, smooth it from the middle out and press it flat under a weight until dry.

Izinto zokwakha zalesi sinyathelo:

Ikhadibhodi lamaphepha anamathisiweIkhadibhodi lamaphepha anamathisiwe1 ishidi
Uglu lwesikhumba sesilwaneUglu lwesikhumba sesilwane10 g

Amathuluzi adingekayo:

Amabhodwe amabili okupheka emanziniAmabhodwe amabili okupheka emanzini
Ipuleti ElishisayoIpuleti Elishisayo
Ibhulashi legluIbhulashi leglu
IsisindoIsisindo
5

Cut it out

On the cutting mat, cut along the straight baseline exactly and round the arc a few millimetres outside the marks.

Amathuluzi adingekayo:

Ummese Womsebenzi WezandlaUmmese Womsebenzi Wezandla
Umata wokusika ozilungisayoUmata wokusika ozilungisayo
IrulaIrula
6

Check it

Measure the baseline from the 0° mark to the 180° mark through the centre cross: it should be 160 mm. Check that 90° stands square to the baseline.

Amathuluzi adingekayo:

IrulaIrula

Izinto

3

Amathuluzi Adingekayo

9

Amafayela omklamo

1

Ama-blueprint ahlobene

Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...