Ukusebenzisana
UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Radial-Roller Spiral-Shaft Churn: A Ring of Cone-Pointed Rollers Turning Both Ways Round a Spiral-Winged Shaft
English
Millie

Yenziwe ngu-

Millie

8. uMfumfu 2026NL
39
0
0
0
0

Radial-Roller Spiral-Shaft Churn: A Ring of Cone-Pointed Rollers Turning Both Ways Round a Spiral-Winged Shaft

James MacNish of Berlin, Wisconsin, received US 20,025, dated 20 April 1858, for a churn in which a central shaft with semi-spiral wings turns inside a circle of rollers with cone-shaped lower ends. A spur wheel on the shaft drives every other roller; those turn their neighbours the opposite way by friction, and the cream is squeezed between them. This rung prints the rollers, the spiral shaft, the spur wheel and the two frames at tabletop scale.
Osezingeni eliphezulu
About 6 hours, plus printing

Imiyalelo

1

Wheel and rollers

Ilayisha incwadi ye-Jupyter…
2

Churns with turning rollers, before it

The self-turning churn carried its rollers on the dasher; MacNish stands a whole ring of rollers round the shaft.
3

Read US 20,025

"By turning the central roller C, rapidly, the cream is dashed by the action of the flanches against the inside of the encircling rollers A, A', which are at the same time set in motion in the direction indicated by the arrows, thus pressing the milk or cream between them as it passes from the inside space a, within the circle of rollers A, A, into the space b, outside of the same."
4

Print the parts

Print four driven rollers with their pinions, four plain rollers, the spiral shaft, the spur wheel with its crank arm, the top frame and the floor plate. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Izinto zokwakha zalesi sinyathelo:

Ifilamenti ye-PETGIfilamenti ye-PETG1 ucezu

Amathuluzi adingekayo:

Iphrinta ye-3D yentambo (i-FDM)Iphrinta ye-3D yentambo (i-FDM)
5

Print the driven rollers with their pinions

The driven rollers with their pinions, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
6

Print the plain rollers

The plain rollers, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
7

Print the spiral shaft

The spiral shaft, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
8

Print the spur wheel

The spur wheel, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
9

Print the top frame

The top frame, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
10

Print the floor plate

The floor plate, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
11

Box and floor plate

Build an open pine box about 174 mm square inside and 190 mm deep. Glue a 10 mm pine strip along two opposite walls, their tops 177 mm above the floor, for the top frame to rest on. Lay the floor plate in the bottom: its eight conical seats take the rollers' cone points and its centre hole takes the shaft.

Izinto zokwakha zalesi sinyathelo:

Ipulangwe lomphayiniIpulangwe lomphayini1 ucezu
Iglu LokhuniIglu Lokhuni1 ucezu
Isikulufo sokhuni #8 x 1"Isikulufo sokhuni #8 x 1"1 ucezu

Amathuluzi adingekayo:

Isaha SesandlaIsaha Sesandla
Ibhola ElingenantamboIbhola Elingenantambo
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Isethi yezikulufudrayivaIsethi yezikulufudrayiva
Ithephu LokulinganisaIthephu Lokulinganisa
12

Rollers, shaft and wheel

Stand the spiral shaft in the centre and the eight rollers round it, driven and plain in turn, so each touches its neighbours. Drop the top frame over their journals onto the strips, then fit the spur wheel on the flat at the shaft's top so it meshes with the four pinions.
13

The build in 3D

FreeCAD model of this build: the box, the floor plate, eight rollers with cone points standing in a circle, four of them with pinions, the spiral-winged shaft in the centre, the top frame and the spur wheel with its crank arm.
Ifayela LomklamoBLENDCC0 - Free
14

Churn

Pour in 1 litre of heavy cream at about 15 °C, checked with the thermometer, to below the top frame. Turn the crank steadily and time it with the stopwatch: the wings throw the cream outward through the rollers and it returns under them between the cone points. When the butter comes, lift out the frame, the rollers and the shaft, pour off the buttermilk, wash the butter in cold water until it runs clear, work in a pinch of salt and weigh it.

Izinto zokwakha zalesi sinyathelo:

Ukhilimu ojiyileUkhilimu ojiyile1 l
Usawoti Wolwandle OmkhuluUsawoti Wolwandle Omkhulu1 ucezu
AmanziAmanzi1 ucezu

Amathuluzi adingekayo:

Ithemomitha enenaliti eshiywa ngaphakathiIthemomitha enenaliti eshiywa ngaphakathi
Iwashi Lokumisa IsikhathiIwashi Lokumisa Isikhathi
Isikali Sedijithali SasekhishiniIsikali Sedijithali Sasekhishini
Isitsha esikhulu sokuxuba sensimbi engagqwaliIsitsha esikhulu sokuxuba sensimbi engagqwali
15

Troubleshooting

Radial-roller churn troubleshooting.

Flow

Loading...
16

History and honest limits

**James MacNish** of Berlin, Marquette County, Wisconsin, US 20,025, 20 April 1858; reissued 30 November 1858 as No. 630. The drawing sheet spells the name McNish. He showed smooth rollers as best for churning milk, a corrugated roller for thin cream and a fluted roller for thick cream, and held all the rollers in an iron frame at the top. He claimed the central spiral-winged shaft with the circle of rollers, some turned directly one way and the others indirectly the opposite way. Our sizes, gear counts and printed frames are ours. FDM prints hold food in their layer lines, so wash well and replace when worn.

Izinto

7

Amathuluzi Adingekayo

10

Amafayela omklamo

7

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...