Ukusebenzisana
UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
English
Rotary-and-Vibrating Dasher Churn: Turn to Churn, Lift and Plunge to Gather
Nash wanted to switch from churning to gathering "without changing the connection of the machinery."
William R. Nash of Bridgeport, Connecticut, received US 7,348, dated 7 May 1850, for working rotary and vertical churn-dashers on one shaft. A rotary dasher of four radial hollow prismatic arms, each with a hole in its forward side near the shaft and an aperture in its rear side near its end, turns above a perforated vibrating dasher held between collars. The pinion on the lid drives the shaft by a pin in a notch, "but the shaft being free to slide vertically upward," the handle on top can work the vibrating dasher up and down.
This rung looks at the hollow arms, then prints both dashers and the notched pinion, fits them in a box, and makes butter.
Ophakathi
About 4 hours, plus printing
Imiyalelo
1
1
Air through the arms
Air through the arms
Ilayisha incwadi ye-Jupyter…
2
2
Rotary and reciprocating dashers on one spindle before it
Rotary and reciprocating dashers on one spindle before it
The embedded blueprint works both dashers at once from one crank. Nash uses them one after the other: rotary to churn, vibrating to gather.
3
3
Read US 7,348
Read US 7,348
"The nature of this invention consists, principally in so arranging and combining in the same churn and upon one shaft, a horizontal rotary dasher and a vertically vibrating dasher, that while the rotary dasher is operated for the purpose of agitating the cream, the vibrating dasher remains at rest; and that when the butter is produced, the vibrating dasher may be operated for the purpose of gathering or consolidating the butter."
4
4
Print the parts
Print the parts
Print the rotary dasher with its four hollow triangular arms, the perforated vibrating dasher, the notched pinion and the crank arm. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Izinto zokwakha zalesi sinyathelo:
Ifilamenti ye-PETG1 ucezuAmathuluzi adingekayo:
Iphrinta ye-3D yentambo (i-FDM)5
5
Print the rotary dasher
Print the rotary dasher
The rotary dasher, printed as step 4 describes.
6
6
Print the vibrating dasher
Print the vibrating dasher
The vibrating dasher, printed as step 4 describes.
7
7
Print the notched pinion
Print the notched pinion
The notched pinion, printed as step 4 describes.
8
8
Print the crank arm
Print the crank arm
The crank arm, printed as step 4 describes.
9
9
Shaft and dashers
Shaft and dashers
Use a 12 mm hardwood dowel as the shaft, squared where the rotary dasher sits. Glue two collars of short dowel on it either side of the vibrating dasher so it is carried up and down but turns freely, and glue the rotary dasher 30 mm above. Drill a cross hole for a steel pin just above where the pinion will sit, and fit a handle on top.
Izinto zokwakha zalesi sinyathelo:
Izikhonkwane zokhuni oluqinile1 ucezu
Ubhamu Oluyindilinga Lwensimbi Ethambile1 ucezu
Iglu Lokhuni1 ucezuAmathuluzi adingekayo:
Isaha Sesandla
Ibhola Elingenantambo
Iqoqo Lamakhanda Ebhola
Isaha Sensimbi10
10
Lid, pinion and crank
Lid, pinion and crank
Take a food-safe square box about 170 mm each way and cut a two-part plywood lid, one part removable. Seat the pinion on the lid round the shaft, the pin lying in its notch. Mount a crown wheel on a short crank shaft between two posts on the lid so its pegs mesh the pinion, as his gear wheel I, and fit the crank arm.
Izinto zokwakha zalesi sinyathelo:
Isitsha sokugcina sezinga lokudla1 ucezu
Ishidi le-plywood1 ucezu
Ipulangwe lomphayini1 ucezuIzikhonkwane zokhuni oluqinile1 ucezu
Isikulufo sokhuni #8 x 1"1 ucezuAmathuluzi adingekayo:
Isaha Se-CopingIbhola Elingenantambo
Isethi yezikulufudrayiva11
11
The patent drawing
The patent drawing
US 7,348 drawing sheet, public domain (expired patent).
12
12
Churn by crank, gather by hand
Churn by crank, gather by hand
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Turn the crank; time until the butter comes. Then work the handle up and down, so the vibrating dasher gathers the butter while the gearing rests. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Izinto zokwakha zalesi sinyathelo:
Ukhilimu ojiyile1500 ml
Usawoti Wolwandle Omkhulu1 ucezu
Amanzi1 ucezuAmathuluzi adingekayo:
Ithemomitha enenaliti eshiywa ngaphakathi
Iwashi Lokumisa Isikhathi
Isikali Sedijithali Sasekhishini
Isitsha esikhulu sokuxuba sensimbi engagqwali13
13
A pin that jumps, a dasher that turns
A pin that jumps, a dasher that turns
Rotary-and-vibrating dasher troubleshooting.
Flow
Loading...
14
14
History and honest limits
History and honest limits
**William R. Nash** of Bridgeport, Fairfield County, Connecticut, received US 7,348, dated 7 May 1850. His lid was in two parts so one could be removed "without disturbing" the other; "one or more additional rotary dashers, may be attached to the vertical shaft." He claimed the application of the shaft to give a vertical reciprocating movement to the vibrating dasher and a rotary one to the others, so either can be used.
**Honest limits.** A pegged crown wheel and pinion stand in for his gear wheel and pinion; a food-safe box and printed dashers for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Izinto
11- 1 ucezuIsibambeli
- Isibambeli
- Isibambeli
- 1 ucezuIsibambeli
- Isibambeli
- 1 ucezuIsibambeli
- 1 ucezuIsibambeli
- 1 ucezuIsibambeli
- 1500 mlIsibambeli
- 1 ucezuIsibambeli
- 1 ucezuIsibambeli
Amathuluzi Adingekayo
11- Isibambeli
- Isibambeli
- 1 vendor sell this, none ship to you yetIsibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
Amafayela omklamo
4Le blueprint yenza
Ama-blueprint ahlobene
Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso
Double-Motion Dasher Churn: One Crank Spins One Dasher and Plunges the Other
ngu-Emma
UKUDLA NEZIPHUZO
33
0
0
0
0
0
Whirl-Frame Air Dasher Churn: Free Wheels Spun by the Milk Inside a Revolving Frame
ngu-Martin
UKUDLA NEZIPHUZO
34
0
0
0
0
0
Hollow-Arm Air Churn: A Spinning Dasher That Breathes Air Into the Cream
ngu-Emma
UKUDLA NEZIPHUZO
32
0
0
0
0
0
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.