UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Rubber Hose: Braided, Spirally Wrapped and Vulcanized in Long Lengths
Henry Cobb's wrapped hose (Revere Rubber, US 1,230,867, 1917). A rubber tube is forced through a ring die, braided over while held open by pressure, wrapped by machine with a helical strip of frictioned fabric overlapping half its width, covered in rubber and vulcanized. Wrapping by machine instead of rolling bias-cut fabric by hand lets the hose run 500 ft or more, and Cobb says it stands nearly twice the bursting pressure.
The patent gives no sizes, recipes or cure times. Couplings are not part of it: an air hose is this hose with couplings fitted. The picture: the patent's sheet 1.
Osezingeni eliphezulu
1 day
Imiyalelo
1
1
Force the inner tube
Force the inner tube
Force vulcanizable rubber compound through the ring-shaped gap between the two parts of a tube die to make the inner tube (1).
Izinto zokwakha zalesi sinyathelo:
Ingxube yenjoloba1 batchAmathuluzi adingekayo:
Isikhunta sokukhipha ishubhu2
2
Braid over the tube
Braid over the tube
Run the tube through a braiding machine that lays crossing helical strands over it (2), coating the strands with rubber compound as they braid. Keep the tube under air pressure so it does not collapse. Ours: the air from a compressor. The braid may be left out, but it holds the hose to size.
Izinto zokwakha zalesi sinyathelo:
Intambo1 batchIngxube yenjoloba1 batchAmathuluzi adingekayo:
Umshini wokuluka
I-compressor yomoya3
3
Cut the fabric along the warp
Cut the fabric along the warp
Cut frictioned fabric into a long strip lengthwise, along the warp threads; wound helically, both warp and weft then run round the hose as if cut on the bias.
Izinto zokwakha zalesi sinyathelo:
Indwangu efakwe injoloba1 umquluAmathuluzi adingekayo:
Ummese wemisebenzi4
4
Wrap the strip half over
Wrap the strip half over
Feed the braided tube through the wrapping machine, which winds the strip (3) round it under tension, each turn over half the last: two plies, the whole length without stopping. For four plies wind a second strip (5) over the first, in the same pass or a second.
Amathuluzi adingekayo:
Umshini wokusonga amapayipi5
5
Plies from the overlap
Plies from the overlap
Ilayisha incwadi ye-Jupyter…
6
6
Cover and vulcanize
Cover and vulcanize
Apply a layer of rubber compound (4) over the last winding for a smooth, protected outside. Vulcanize the hose for its whole length in a mould or otherwise.
Izinto zokwakha zalesi sinyathelo:
Ingxube yenjoloba1 batchAmathuluzi adingekayo:
Isikhunta sokuvulkanayizaIzinto
3- 1 batchIsibambeli
- 1 batchIsibambeli
- 1 umquluIsibambeli
Amathuluzi Adingekayo
6- Isibambeli
- Isibambeli
- 1 vendor sell this, none ship to you yetIsibambeli
- Isibambeli
- Isibambeli
- Isibambeli
Le blueprint yenza
Ama-blueprint ahlobene
Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.