UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Silver Solder from Fine Silver, Copper and Spelter: Gee, 1877
Silver solder joins silver, copper and brass with a strong, hard seam. The silversmith George Gee preferred one made of fine silver, shot copper and a little spelter (zinc), melted only once: his best hard solder is 16 dwt of fine silver, 3 dwt 12 gr of shot copper and 12 gr of spelter to the ounce, about 80, 17.5 and 2.5 per cent. More copper and zinc make it flow sooner (his medium, easy and common solders). Silver and copper alone give the hardest, least fusible solder; too much zinc makes it eat away during soldering.
Ophakathi
Two hours
Imiyalelo
1
1
Weigh the metals
Weigh the metals
Ilayisha incwadi ye-Jupyter…
Izinto zokwakha zalesi sinyathelo:
Isiliva Esimsulwa80 g
Isigaxa Sethusi17.5 g
Isigaxa Sikazinki2.5 gAmathuluzi adingekayo:
Isikali
Isisebenzi sensimbi ebandayo2
2
Anneal and test the crucible
Anneal and test the crucible
Before a new plumbago (graphite) crucible is charged, heat it slowly to redness on a fire that is dying down and has no blaze, so it does not crack. Touch it with a cold iron bar: if cracks show, reject it.
Amathuluzi adingekayo:
Ibhodwe lokuncibilikisa le-graphite nobumba
Isithando Samalahle
Udlawu Lwesitsha Sokuncibilikisa3
3
Melt silver and copper
Melt silver and copper
Put the copper at the bottom of the crucible, the silver on top, and melt them in the furnace. Stir them well together with an iron stirrer, tapered at the point and first heated to redness. When the metals are just beginning to fuse, cover the melt with finely divided, pure charcoal to keep the air off it.
Izinto zokwakha zalesi sinyathelo:
Amalahle - agayiwe acolekile1 as requiredAmathuluzi adingekayo:
Isithando Samalahle
Induku yokugovuza encijile
Amagilavu Amelana Nokushisa4
4
Add the spelter
Add the spelter
Hold the spelter in a long pair of tongs over the mouth of the crucible, inside the furnace, until it has almost reached its melting point, then drop it into the molten metal and stir quickly so it mixes in. Zinc burns away quickly in the air, so it goes in last.
Amathuluzi adingekayo:
UdlawuInduku yokugovuza encijileAmagilavu Amelana Nokushisa5
5
Pour the ingot
Pour the ingot
Withdraw the crucible from the furnace at once and pour into an ingot mould that is clean, smooth, lightly greased, dusted with fine charcoal and warmed: a cold mould makes the metal spout, but do not overheat it either. Melt solder only once; Gee found that solders containing volatile metals grow hard, brittle and drossy with repeated melting.
Izinto zokwakha zalesi sinyathelo:
Amalahle - agayiwe acolekile1 as requiredAmathuluzi adingekayo:
Udlawu Lwesitsha Sokuncibilikisa
Isikhunta sokuthela insimbiAmagilavu Amelana Nokushisa6
6
Roll into pallions or file to dust
Roll into pallions or file to dust
Roll the solder out thin between flattening rollers and cut it lengthways and then crossways with hand shears into little bits (pallions), or file it into fine dust, according to the work in hand. The work is then bound together, wetted with a paste of borax and water, and the pallions laid on the joints and melted with a blowpipe flame.
Amathuluzi adingekayo:
Umshini wokugingqa insimbi
Isikelo sensimbi
Izinsimbi zokuhlikihla (ezesandla)Izinto
4- Isibambeli
- 17.5 gIsibambeli
- 2.5 gIsibambeli
- 1 as requiredIsibambeli
Amathuluzi Adingekayo
12- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
Le blueprint yenza
Ama-blueprint ahlobene
Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso
Yingozi
Extracting Silver by Cupellation — Separating Noble Metal from Lead Ore
ngu-Peter
Umsebenzi Wensimbi
71
0
0
0
2
0
Smelting Copper from Malachite — From Green Ore to Red Metal
ngu-Peter
Umsebenzi Wensimbi
108
0
0
0
10
0
Extracting Zinc from Sphalerite — Roasting and Reduction of the Invisible Metal
ngu-Peter
Umsebenzi Wensimbi
81
0
0
0
8
0
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.