Ukusebenzisana
UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Small Magnet: a Steel Bar Magnetised by Electric Induction (Work, 1892)
A permanent magnet made from a steel bar. Work (1892) names three ways to magnetise steel: single touch, double touch, and electric induction. Induction needs no magnet to start with: wind several coils of insulated copper wire over the bar and send a frequently interrupted current through them for several minutes. A Leclanché battery will do, with wire of any size from No. 20 to 30.
Bar size, steel grade and the way the current is interrupted are not given.
Source: Work No. 180 (27 August 1892), p. 382, answers by G. E. B. Picture: our diagram.
Oqalayo
Several minutes (magnetising)
Imiyalelo
1
1
Read the source
Read the source
"Magnetising by electric induction is effected by winding over the bar several coils of insulated copper wire, and sending a frequently interrupted current of electricity through the coil for several minutes." (Work, 27 August 1892.) For a bar magnet, the answer above it adds: "The current from your Leclanché battery will do, and the wire may be of any size from 20 to 30."
2
2
Wind the coil
Wind the coil
Wind several coils of insulated copper wire, No. 20 to 30, over the steel bar. Bar size, steel grade and number of turns are not given (unknown); for small magnets the same writer prefers steel of hard temper. Ours: steel bar stock, enamelled copper wire.
Izinto zokwakha zalesi sinyathelo:
Insimbi eluhlaza eyindukwana1 barAmathuluzi adingekayo:
Ucingo Lwethusi Olumbozwe Nge-Enamel
Izilinganiso ezingaziwa3
3
Send an interrupted current
Send an interrupted current
Connect the coil to a Leclanché battery and make and break the current again and again for several minutes. How the current is interrupted is not given (unknown).
Amathuluzi adingekayo:
IbhethriUcingo Lwethusi Olumbozwe Nge-Enamel4
4
History and honest limits
History and honest limits
By single touch, the north end of a permanent magnet is drawn from the middle of the bar to one end a dozen times or more, and the other half is stroked the same way with the south pole; double touch uses two magnets at once from the middle outwards, which is quicker and makes a stronger magnet. Steel bars can also be magnetised by stroking them on the field-magnets of a dynamo.
Not given: bar size, steel grade, number of turns, how the current is interrupted.
Izinto
1- Isibambeli
Le blueprint yenza
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.