UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Spring Steel Strip and Wire, Hardened and Tempered
Forge

Yenziwe ngu-

Forge

11. uMfumfu 2026NO
41
0
0
0
0

Spring Steel Strip and Wire, Hardened and Tempered

A spring must bend and come back. Mild steel bends and stays bent; high-carbon steel, hardened and then tempered to a blue colour, springs back. The strip or wire is shaped soft, heated until a magnet no longer sticks to it, quenched in warm oil to harden it, then tempered: cleaned bright and heated gently until the colour runs to blue. It starts from high-carbon crucible steel. Wire is drawn while the steel is still annealed.
Osezingeni eliphezulu
A day

Imiyalelo

1

Forge strip

Forge crucible steel at a yellow heat into strip, smoothing it with the flatter; never work it below red. Cut it to length while hot.

Izinto zokwakha zalesi sinyathelo:

Insimbi yembiza yokuncibilikisaInsimbi yembiza yokuncibilikisa1 kg
AmalahleAmalahle10 kg

Amathuluzi adingekayo:

Iziko lomkhandi wensimbiIziko lomkhandi wensimbi
Insimbi YokukhandelaInsimbi Yokukhandela
Isando somkhandi wensimbiIsando somkhandi wensimbi
Ithuluzi lokwenza kube yisicabaIthuluzi lokwenza kube yisicaba
Udlawu lomkhandi wensimbiUdlawu lomkhandi wensimbi
Ipheshana LesikhumbaIpheshana Lesikhumba
Amagilavu okushiselaAmagilavu okushisela
Izibuko zokuphephaIzibuko zokuphepha
2

Anneal

Heat to a dull red and bury it in dry wood ash to cool slowly overnight.

Izinto zokwakha zalesi sinyathelo:

Umlotha Wokhuni OluqinileUmlotha Wokhuni Oluqinile2 kg

Amathuluzi adingekayo:

Ibhakede lensimbiIbhakede lensimbi
3

Draw wire

For wire, forge a rod, anneal it, and draw it through the drawplate with wax, annealing after every hole. Coil or bend the springs now, while it is soft.

Izinto zokwakha zalesi sinyathelo:

Isibabule SezinyosiIsibabule Sezinyosi10 g

Amathuluzi adingekayo:

Ipuleti lokudonsa ucingo lensimbiIpuleti lokudonsa ucingo lensimbi
Udlawu lokudonsaUdlawu lokudonsa
Isibambo SebhentshiIsibambo Sebhentshi
4

Harden

Heat the part evenly until a magnet no longer sticks, then plunge it into a lidded bucket of warm rapeseed oil and stir it. Keep the lid at hand for flare-ups.

Izinto zokwakha zalesi sinyathelo:

Uwoyela we-canolaUwoyela we-canola5 amalitha

Amathuluzi adingekayo:

Iziko lomkhandi wensimbiIziko lomkhandi wensimbi
UzibutheUzibuthe
Ibhakede lensimbi elinesivaloIbhakede lensimbi elinesivalo
Udlawu lomkhandi wensimbiUdlawu lomkhandi wensimbi
Amagilavu okushiselaAmagilavu okushisela
5

Clean bright

Sand a stripe bright on the hardened steel so you can see the temper colours.

Amathuluzi adingekayo:

Ishidi lephepha lokuhlikihlaIshidi lephepha lokuhlikihla
6

Temper to blue

Heat it gently and evenly with the torch on fire bricks, or on a hot plate of steel, and watch the colours run straw, bronze, purple, blue. Stop at an even blue and let it cool.

Amathuluzi adingekayo:

Isibani Se-propaneIsibani Se-propane
Isitini somliloIsitini somlilo
Udlawu lomkhandi wensimbiUdlawu lomkhandi wensimbi
7

Test

Clamp one end in the vise and bend the free end a little: it must spring back straight.

Amathuluzi adingekayo:

Isibambo SebhentshiIsibambo Sebhentshi
I-Caliper Yedijithali Yamayintshi Ayi-6I-Caliper Yedijithali Yamayintshi Ayi-6
8

Troubleshooting

Spring tempering troubleshooting.

Flow

Loading...

Izinto

5

Amathuluzi Adingekayo

18

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...