UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box
Martin

Yenziwe ngu-

Martin

6. uMfumfu 2026NO
26
0
0
0
0

Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box

A beater spun in a round bowl soon drags the whole mixture round with it. Thomas McBean of Fowlerville, New York, received US 24,134, dated 24 May 1859, for an egg beater: "a double spiral-shaped beater or dasher with its surface formed into steps within a square box," turned horizontally on a vertical shaft by a bevel pinion and a handle, so that the dasher and the square box together "so thoroughly breaks up all portions of the eggs that they may be well and very thoroughly beaten in a few seconds." This rung compares the side and corner gaps, then prints the stepped dasher, builds a square box with a bevel drive, and times beating in the box against a round bowl.
Ophakathi
About 4 hours, plus printing

Imiyalelo

1

Tip speed and the corners

Ilayisha incwadi ye-Jupyter…
2

A geared beater a month before it

The embedded blueprint beats with two wire whisks turning opposite ways. McBean turns one stepped dasher and lets the box's corners do the breaking up.
3

Read US 24,134

"The nature of my invention consists in arranging a double spiral-shaped beater or dasher with its surface formed into steps within a square box and in communicating to this dasher a swift rotary motion so as to revolve it horizontally within said box."
4

Print the dasher

Print the stepped double-spiral dasher. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

Izinto zokwakha zalesi sinyathelo:

Ifilamenti ye-PETGIfilamenti ye-PETG1 ucezu

Amathuluzi adingekayo:

Iphrinta ye-3D yentambo (i-FDM)Iphrinta ye-3D yentambo (i-FDM)
5

Print the dasher

The dasher, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
6

Build the box

Cut a plywood base and four sides to make a box 104 mm square inside and 90 mm deep. Glue and screw it, and seal the inside seams with silicone.

Izinto zokwakha zalesi sinyathelo:

Ishidi le-plywoodIshidi le-plywood1 ucezu
Isikulufo sokhuni #8 x 1"Isikulufo sokhuni #8 x 1"1 ucezu
Isivalo Se-siliconeIsivalo Se-silicone1 ucezu

Amathuluzi adingekayo:

Isaha Se-CopingIsaha Se-Coping
Ibhola ElingenantamboIbhola Elingenantambo
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Isethi yezikulufudrayivaIsethi yezikulufudrayiva
IrulaIrula
7

Fit the shaft and gears

Screw a hardwood bar across the box's top with a bracket above it. Run a 5 mm rod down through the bar to a socket in the floor, with the dasher at its foot and one bevel gear at its top; mount the other gear on a crank shaft through the bracket so they mesh.

Izinto zokwakha zalesi sinyathelo:

Ibhulokhi Lokhuni OluqinileIbhulokhi Lokhuni Oluqinile1 ucezu
Ubhamu Oluyindilinga Lwensimbi EthambileUbhamu Oluyindilinga Lwensimbi Ethambile1 ucezu
Isethi yamagiya e-bevel (insimbi, 1:1)Isethi yamagiya e-bevel (insimbi, 1:1)1 ucezu
I-epoxy Yezingxenye EzimbiliI-epoxy Yezingxenye Ezimbili1 ucezu
Iwasha EliyisicabaIwasha Eliyisicaba1 ucezu

Amathuluzi adingekayo:

Isaha SensimbiIsaha Sensimbi
Ibhola ElingenantamboIbhola Elingenantambo
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Isibambo SebhentshiIsibambo Sebhentshi
8

The patent drawing

US 24,134 drawing sheet, public domain (expired patent).
Isinyathelo 8 - Image 1
9

Square box against round bowl

Beat two egg whites in the box at about two crank turns a second and time them to stiff peaks. Repeat with the dasher in a round bowl of the same size.
Isinyathelo 9 - Image 1

Izinto zokwakha zalesi sinyathelo:

IqandaIqanda4 izicucu

Amathuluzi adingekayo:

Isitsha esikhulu sokuxuba sensimbi engagqwaliIsitsha esikhulu sokuxuba sensimbi engagqwali
Iwashi Lokumisa IsikhathiIwashi Lokumisa Isikhathi
10

A dasher that swirls, scrapes or slips

Stepped spiral egg beater troubleshooting.

Flow

Loading...
11

History and honest limits

**Thomas McBean** of Fowlerville, Livingston County, New York, received US 24,134, dated 24 May 1859. The dasher's spiral circular plates are soldered to a small tube and bent into steps radial from the axis; the shaft passes up through the box's cover to a bracket, its lower end resting on a pin in the box's bottom. He claimed the double spiral dasher in combination with the square box. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A printed dasher and a bought 1:1 bevel pair stand in for his tin plates and pinions. Your times are the result.

Izinto

10

Amathuluzi Adingekayo

10

Amafayela omklamo

1

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...