
Building a Talking Drum — West Africa's Squeeze-to-Speak Dùndún
Instructions
A drum you can squeeze to talk
A drum you can squeeze to talk
Carve the hourglass body
Carve the hourglass body
Materials for this step:
Dry Softwood Board1 piece
PVA Wood Glue1 pieceTools needed:
Sloyd Carving Knife
HacksawCut the two heads
Cut the two heads
Materials for this step:
Rawhide2 piecesMake two rings and mount the heads
Make two rings and mount the heads
Materials for this step:
Bronze Wire1 pieceLace the tension cords
Lace the tension cords
Materials for this step:
Abaca Tying Twine1 pieceTools needed:
AwlFit the curved beater
Fit the curved beater
Materials for this step:
Dowel Rod1 piecePlay and make it speak
Play and make it speak
Compendium — the variable-tension pressure drum
Compendium — the variable-tension pressure drum
Materials
6- 1 piecePlaceholder
- 1 piecePlaceholder
- 1 piecePlaceholder
- 1 piecePlaceholder
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Abaca Tying Twine, try:
Cotton Twine (for bundling)
Jute Twine - Instead of Sloyd Carving Knife, try:
Blunt Collection Knife
Gilder's Knife
Knife
Sharp Cinnamon Knife - Instead of PVA Wood Glue, try:
Polyurethane Glue - Instead of Bronze Wire, try:
Hook-Up Wire - Assortment (Stranded)
Tie Wire
Thin Brass Wire (for cleaning spouts)
Slip Ring - 6 Wire (2A)
Bezel Wire
Related Blueprints
These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.
Related blueprints
Other builds that share materials, tools, or techniques with this one.






CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.