সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
One-Piece Cuff Button: Two Faces and a V Shank Cut From One Brass Blank (Buchsbaum, 1923)
Forge

তৈরি করেছেন

Forge

13. নভেম্বর 2026NO
৩
০
০
০
০

One-Piece Cuff Button: Two Faces and a V Shank Cut From One Brass Blank (Buchsbaum, 1923)

Samuel Buchsbaum of Chicago received US 1,444,023, dated 6 February 1923, for a cuff button made in one piece. A flat blank has two oval faces joined at their edges by a tongue. The tongue is bent into a V-shaped shank with a curved middle, and the faces lean in towards each other. Pockets between the shank and the faces hold the two ends of the cuff together. There is nothing to solder and nothing to come apart. We cut it from brass sheet with a jeweller's saw, using a 1:1 template. All sizes are ours.
শিক্ষানবিশ
About 2 hours

নির্দেশাবলি

1

Where the cuff is gripped

Jupyter নোটবুক লোড হচ্ছে…
2

Read US 1,444,023

"It is a purpose of the present invention to form a cuff button wherein the face members and shank portion are integral, said members being all stamped from a single sheet of material."
3

Print the template

Three blanks at 1:1 with the bend lines, and a side view of the bent button. print at 100 % (check the 50 mm bar).
নকশা ফাইলPDFCC0 - Free
4

Cut the blank

Cut a blank out of the paper and lay it on 0.8 mm brass sheet. Scribe round it. Saw just outside the line with a jeweller's saw, then file to the line, keeping the tongue an even 4 mm wide where it meets each face.

এই ধাপের উপকরণ:

পিতলের পাতপিতলের পাত1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দাগ টানার শলাকাদাগ টানার শলাকা
স্যাকরার করাতস্যাকরার করাত
সূক্ষ্ম উকোর সেটসূক্ষ্ম উকোর সেট
বেঞ্চ ভাইসবেঞ্চ ভাইস
5

Smooth the edges

Round every edge with the needle files and sandpaper so nothing can catch the cuff or the skin. Do the faces' fronts now: they are hard to reach once bent.

প্রয়োজনীয় সরঞ্জাম:

সূক্ষ্ম উকোর সেটসূক্ষ্ম উকোর সেট
শিরিষ কাগজশিরিষ কাগজ
6

Bend the shank

Hold the middle of the tongue round a 3 mm rod, or in the round-nose pliers, and bend both halves up into a V about 60 degrees apart (ours). The middle stays curved, as his part 16.

প্রয়োজনীয় সরঞ্জাম:

গোল মুখের সাঁড়াশিগোল মুখের সাঁড়াশি
নরম ইস্পাতের গোল দণ্ডনরম ইস্পাতের গোল দণ্ড
7

Bend the faces

Grip each leg close to its face with the flat-nose pliers and fold the face back down outside the leg, so it hangs beside the leg and leans in a little, as in his Fig. 1. The narrow gap between leg and face is the pocket for the cuff. Check both faces sit level with each other.

প্রয়োজনীয় সরঞ্জাম:

চ্যাপ্টা মুখের সাঁড়াশিচ্যাপ্টা মুখের সাঁড়াশি
8

Polish

Polish the faces with polishing compound on a soft cloth.

প্রয়োজনীয় সরঞ্জাম:

পালিশের প্রলেপপালিশের প্রলেপ
9

Fit it to the cuff

Turn the button edgewise and pass one face through both buttonholes, turning it as it goes, as he describes. Each cuff end should sit in a pocket between a leg and its face, and the ends stay together. If it is too tight, open the faces out a little; if loose, press them in.

প্রয়োজনীয় সরঞ্জাম:

চ্যাপ্টা মুখের সাঁড়াশিচ্যাপ্টা মুখের সাঁড়াশি
10

Troubleshooting

One-piece cuff button troubleshooting.

Flow

Loading...
11

History and honest limits

**Samuel Buchsbaum** of Chicago, US 1,444,023, dated 6 February 1923, filed 22 August 1921. He claimed "a blank for cuff buttons comprising a sheet metal member having enlarged end members and a connecting tongue joining the adjacent edge portions of said end members". His were stamped; ours is sawn and filed. He also shows a form with square ends and a reinforced tongue (Figs. 5-6), not built here. He gives no sizes or metal: the brass, the 18 x 12 mm faces, the 4 x 18 mm tongue and the angles are ours.

উপকরণ

1
  • প্লেসহোল্ডার

প্রয়োজনীয় সরঞ্জাম

9

ডিজাইন ফাইল

1

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...