সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Fermenter Lid with Airlock Seat, 3D Printed in PETG
A snap-on lid that turns a small food-grade pail into a fermenter. It follows L. P. Beadle's 1980 US patent 4,218,964: an off-centre tapered hole that matches the airlock stem's taper, a triangular rim set in a groove so it flexes round the stem, stiffening rings, and a snap-fit edge. You measure your pail's rim and make the file for it. All sizes are ours, and we have not printed or tested it yet.
শিক্ষানবিশ
About 10 hours, mostly printing
নির্দেশাবলি
1
1
Lid size, stem depth and gas force
Lid size, stem depth and gas force
Jupyter নোটবুক লোড হচ্ছে…
2
2
Read US 4,218,964
Read US 4,218,964
"The stem support structure 30 includes a tapered hole the depth and slope of which are adapted to conform to the taper of stem 26 and to provide a resilient, gripping action ... annular rim portion 35 is defined by depressed circular groove 36 which provides the annular rim 35 with a type of hinge action." He put the hole off centre so the lid would not crack. The picture is our section.

3
3
Measure the pail
Measure the pail
Use a food-grade plastic pail with a rim lip all round. Measure the lip's outside diameter, and from the pail's top edge to the underside of the lip.
প্রয়োজনীয় সরঞ্জাম:
ডিজিটাল ক্যালিপার ৬ ইঞ্চি
গাঁজন বালতি4
4
Make the lid for your pail
Make the lid for your pail
Run it in FreeCAD with your two measurements: OUT=. LIP_D= LIP_H= freecadcmd build_all.py
build_all.pypython
প্রয়োজনীয় সরঞ্জাম:
ডেস্কটপ কম্পিউটার
CAD সফ্টওয়্যার5
5
Print the lid
Print the lid
Print it top face down on the bed, no supports: the skirt and stiffening rings grow upwards. PETG sold for food contact, a stainless steel nozzle (brass nozzles can contain lead), 0.2 mm layers, at least 4 walls. The file here is for a 180 mm lip.
এই ধাপের উপকরণ:
PETG ফিলামেন্ট125 গ্রাপ্রয়োজনীয় সরঞ্জাম:
ফিলামেন্টের 3D প্রিন্টার (FDM)
3D প্রিন্টার নজল সেট6
6
Fit the airlock
Fit the airlock
Push the airlock's stem down into the hole by hand until it wedges, about 30 mm for our airlock. Do not force it further.
প্রয়োজনীয় সরঞ্জাম:
গাঁজানোর এয়ারলক7
7
Leak test
Leak test
Fill the airlock to its line with water. Snap the lid on the empty pail. Press the middle of the lid gently: gas must bubble through the airlock, with no hiss at the rim or stem.
প্রয়োজনীয় সরঞ্জাম:
গাঁজন বালতি
গাঁজানোর এয়ারলক
জল8
8
Sanitise
Sanitise
Wipe or soak the lid in no-rinse sanitiser mixed as its label says. Do not boil it: PETG softens at about 80 °C.
প্রয়োজনীয় সরঞ্জাম:
জীবাণুনাশক
জল9
9
Close the fermenter
Close the fermenter
Start the bead under the lip at one side and press the lid down all round until it snaps on.
প্রয়োজনীয় সরঞ্জাম:
গাঁজন বালতি10
10
Troubleshooting
Troubleshooting
Lid problems and fixes.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Leigh P. Beadle**, US 4,218,964, filed 21 May 1979, issued 26 August 1980, assigned to Specialty Products International Ltd. His lids were moulded in flexible plastic, and he noted that drilling a plain hole in the middle of a lid led to cracks and to gas escaping round the stem. He gives no sizes. Ours: every size, PETG, the bead and the fit to a measured pail. One change: his rim rises above the lid's top; ours stands in a recess with its top level with the lid, so the lid prints flat. PETG is stiffer than his plastic, so the grip comes more from the matched taper than from the rim. Checked in CAD; not yet printed or brewed with by us.
উপকরণ
1- 125 গ্রাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
9- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
ডিজাইন ফাইল
1সংযুক্ত ব্লুপ্রিন্টের উপাদান
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।




