সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Wishbone-Mast Ice Yacht: 16 ft Backbone, Twin-Pole Mast and Double Lateen Booms (Boy Mechanic, 1919)
Woody

তৈরি করেছেন

Woody

13. নভেম্বর 2026NO
৮
০
০
০
০

Wishbone-Mast Ice Yacht: 16 ft Backbone, Twin-Pole Mast and Double Lateen Booms (Boy Mechanic, 1919)

John F. Pjerrou's ice yacht from The Boy Mechanic, Book 3 (1919), for one or two passengers: a 16 ft spruce backbone on a 12 ft 6 in runner plank, oak runners shod with half-round iron, a mast of two 12 ft poles joined at the head, and two lateen sails on a yard and two 16 ft booms that spread into a V when running before the wind. It takes down for storage.
উন্নত
Several weeks

নির্দেশাবলি

1

Main sizes and the mast's height

Jupyter নোটবুক লোড হচ্ছে…
2

Read The Boy Mechanic, Book 3

"The dimensions given are for a small yacht, and care must be taken, in adapting the design, to maintain proper proportions for stability and safety."
3

Make the backbone and runner plank

Use only the best straight-grained spruce or white pine. Backbone: 4 in thick, 16 ft long and 8 in high at the centre, with a ridge 8 in high and 2 ft 6 in long; taper it from the middle, 5 ft 6 in from the forward end, to 4 in at each end, and fit a three-eye metal ring at the bow (Figs. 1, 5). Runner plank: 2 in thick, 10 in wide, 12 ft 6 in long, tapered to 8 in at the ends. Set the backbone on the plank at right angles, 6 ft from the bow, and clamp them with two strap bolts, washers and nuts (Figs. 2, 3).

এই ধাপের উপকরণ:

পাইন কাঠপাইন কাঠ2 টুকরা
ধাতুর আংটাধাতুর আংটা1 টুকরা
U আকারের আংটাU আকারের আংটা2 টুকরা
সমতল ওয়াশারসমতল ওয়াশার4 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম4 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-করাতহাত-করাত
রান্দারান্দা
দুই হাতলের টানা ছুরিদুই হাতলের টানা ছুরি
হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
ফিতা-মাপফিতা-মাপ
পেনসিলপেনসিল
4

Fit the guides and forward runners

Bolt guides of straight-grained oak, 1-1/2 by 3 by 14 in, to the plank ends with 5/16 in carriage bolts, and bolt oak chocks at each tapered edge (Fig. 4). Make the forward runners of oak, 1-1/2 by 5 by 36 in, shaped at the ends as drawn, and shoe them with half-round strap iron held by screws with carefully countersunk heads. Pivot them on 5/8 in bolts (5 in long in Fig. 1), nuts to the inner side, with washers and jam nuts, or rivet the bolt ends slightly so the nuts cannot work loose.

এই ধাপের উপকরণ:

সাদা ওকের তক্তাসাদা ওকের তক্তা3 টুকরা
গোল মাথার বোল্টগোল মাথার বোল্ট8 টুকরা
অর্ধগোল লোহার দণ্ডঅর্ধগোল লোহার দণ্ড2 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা
সমতল ওয়াশারসমতল ওয়াশার4 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম4 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-করাতহাত-করাত
রান্দারান্দা
হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
হাত-ড্রিলহাত-ড্রিল
কাউন্টারসিংক ড্রিল বিট সেটকাউন্টারসিংক ড্রিল বিট সেট
হ্যাকসহ্যাকস
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
5

Make the stern runner and steering

Make the stern runner of oak, 1-1/2 by 5 by 30 in, shod like the others. Pivot it on a 3/8 in bolt in a hanger of heavy iron strip bent into a U and riveted to a vertical shaft. Put a heavy rubber washer, protected by a metal one, on the shaft; thread its upper end for a washer and nut, slip a section of pipe over the shaft, and clamp the steering handle (2 ft 10 in in Fig. 1) on a squared part of the shaft. The hanger may be forged, or made by a blacksmith.

এই ধাপের উপকরণ:

সাদা ওকের তক্তাসাদা ওকের তক্তা1 টুকরা
অর্ধগোল লোহার দণ্ডঅর্ধগোল লোহার দণ্ড1 টুকরা
নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
নরম ইস্পাতের গোল দণ্ডনরম ইস্পাতের গোল দণ্ড1 টুকরা
লোহার রিভেটলোহার রিভেট2 টুকরা
গোল মাথার বোল্টগোল মাথার বোল্ট1 টুকরা
রবারের ওয়াশাররবারের ওয়াশার1 টুকরা
সমতল ওয়াশারসমতল ওয়াশার2 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম2 টুকরা
দস্তা মাখানো ইস্পাতের পাইপদস্তা মাখানো ইস্পাতের পাইপ1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়িহাতুড়ি
বেঞ্চ ভাইসবেঞ্চ ভাইস
হ্যাকসহ্যাকস
হাত-ড্রিলহাত-ড্রিল
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
6

Build the cockpit

Fix a cockpit 5 ft long and 3 ft wide, with 4 in coaming, to the lower side of the backbone toward the stern; fasten its floor to the backbone with lag screws and fasten the coaming securely. Square corners are easiest; rounded ends with steamed, bent coaming are better. Larger craft may carry it on ribs.

এই ধাপের উপকরণ:

পাইন কাঠের তক্তাপাইন কাঠের তক্তা4 টুকরা
ল্যাগ স্ক্রু (কোচ স্ক্রু)ল্যাগ স্ক্রু (কোচ স্ক্রু)6 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-করাতহাত-করাত
হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
ফিতা-মাপফিতা-মাপ
7

Square up and stay the frame

Line up runners, plank and backbone at right angles so the craft tracks true. Hold them with four 1/4 in wire-rope stays with turnbuckles, from eyes on the bow band and on the bands at the plank ends to an eyebolt below the cockpit (Fig. 2). Loop each rope end and clamp the eye with steel clamps made for the purpose (wire-rope clips); metal thimbles in the loops make a better finish.

এই ধাপের উপকরণ:

তারের দড়ি (ওয়্যার রোপ)তারের দড়ি (ওয়্যার রোপ)1 টুকরা
টার্নবাকলটার্নবাকল4 টুকরা
অঙ্গুলিত্রাণঅঙ্গুলিত্রাণ8 টুকরা
তারের দড়ির ক্লিপতারের দড়ির ক্লিপ8 টুকরা
চোখওয়ালা বোল্টচোখওয়ালা বোল্ট1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হ্যাকসহ্যাকস
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
ফিতা-মাপফিতা-মাপ
8

Make the wishbone mast

Shape two poles of hickory or ash, 3-1/2 in thick at the base and 2 in at the top (12 ft in Fig. 6). Join them carefully at the masthead, bolt them together into an oak breast hook, and reinforce the joint with an iron strap with an eye at its upper end for the forward stay. Step the lower ends in sockets in the runner plank, about 8 ft apart, reinforced with oak mast blocks, and fit their projecting ends with 3 in two-eyed bands for the stays (Figs. 4, 6).

এই ধাপের উপকরণ:

কাঠের খুঁটিকাঠের খুঁটি2 টুকরা
সাদা ওকের তক্তাসাদা ওকের তক্তা1 টুকরা
নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
গোল মাথার বোল্টগোল মাথার বোল্ট2 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম2 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দুই হাতলের টানা ছুরিদুই হাতলের টানা ছুরি
রান্দারান্দা
হাত-করাতহাত-করাত
হাতে ঘোরানো তুরপুন ও ফলাহাতে ঘোরানো তুরপুন ও ফলা
বাটালিবাটালি
কামারের ভাটিকামারের ভাটি
নেহাইনেহাই
হাতুড়িহাতুড়ি
9

Make the yard and booms

Make the yard and two booms of hickory or ash, each 16 ft long, 2-3/4 in at the middle tapering to 1-1/2 in at the ends, with metal rings on the ends against splitting. Bolt loops to their forward ends to engage an eyebolt and ring on the backbone at the bow; set the eyebolt in a slotted plate of 3/16 in sheet iron, fastened by a lever nut (Fig. 5).

এই ধাপের উপকরণ:

কাঠের খুঁটিকাঠের খুঁটি3 টুকরা
ধাতুর আংটাধাতুর আংটা6 টুকরা
চোখওয়ালা বোল্টচোখওয়ালা বোল্ট1 টুকরা
নরম ইস্পাতের পাতনরম ইস্পাতের পাত1 টুকরা
নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
গোল মাথার বোল্টগোল মাথার বোল্ট3 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম3 টুকরা

প্রয়োজনীয় সরঞ্জাম:

দুই হাতলের টানা ছুরিদুই হাতলের টানা ছুরি
রান্দারান্দা
হ্যাকসহ্যাকস
হাত-ড্রিলহাত-ড্রিল
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
বেঞ্চ ভাইসবেঞ্চ ভাইস
10

Sew the sails

Make two lateen sails of 8-oz unbleached cotton duck: lap the breadths about 1 in and stitch along the edge (or fold 1 in and double-stitch), the seams parallel to the leech. Reinforce each corner with a triangular patch of duck and bind the edges with 1/4 in tarred rope, using a sailor's palm, a diamond-pointed needle and sail twine, well waxed (the wax is ours: beeswax). Along the yard and boom edges punch holes, set two 3/4 in brass grommet rings in each, one each side, and overcast them with buttonhole stitch. Sew in reef points of 1/8 in cotton rope, whipped at the ends.

এই ধাপের উপকরণ:

ক্যানভাস কাপড়ক্যানভাস কাপড়1 টুকরা
পালের সুতলিপালের সুতলি1 টুকরা
মৌমাছির মোমমৌমাছির মোম1 টুকরা
আলকাতরা মাখানো দড়িআলকাতরা মাখানো দড়ি1 টুকরা
পিতলের গ্রোমেটপিতলের গ্রোমেট40 টুকরা
সুতির রশিসুতির রশি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

নাবিকের তালু-ঢালনাবিকের তালু-ঢাল
পালের সুইপালের সুই
কাগজ পাঞ্চকাগজ পাঞ্চ
কাঁচিকাঁচি
ফিতা-মাপফিতা-মাপ
11

Set up and rig

Fit the forward ring and strap bolts, the runners and steering, then step the mast, clamp the masthead and fit the bands; set the bottom stays and the masthead stay with the turnbuckles. Lace the sails to yard and booms and fix the forward ends at the bow. Run a 3/8 in halyard from the yard through a pulley at the masthead and a second on the runner plank to cleats by the cockpit, and haul up so the sails set. Lash the main sheets to the boom ends, through pulleys at the stern of the backbone and on the booms about 1 ft and 5 ft from their ends, then to cleats at the cockpit; the second boom needs a duplicate set. Taking down is the reverse.

এই ধাপের উপকরণ:

দড়িদড়ি1 টুকরা
কপিকলকপিকল6 টুকরা
দড়ি বাঁধার ক্লিটদড়ি বাঁধার ক্লিট4 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
হাত-ড্রিলহাত-ড্রিল
12

Finish

Smooth the masts, yard and booms, sandpaper them lightly and give them several coats of spar varnish; paint the other woodwork. He gives the metal fittings two coats of red lead "or other good paint for use on metals exposed to the weather": red lead is a lead poison, so use the other paint.

এই ধাপের উপকরণ:

শিরিষ কাগজশিরিষ কাগজ1 টুকরা
মাস্তুলের বার্নিশমাস্তুলের বার্নিশ1 টুকরা
তৈলরংতৈলরং1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

চওড়া রঙের তুলিচওড়া রঙের তুলি
13

Sailing and troubleshooting

Ice yacht sailing.

Flow

Loading...
14

History and honest limits

From "A Wishbone-Mast Ice Yacht" by John F. Pjerrou, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 17-20). He gives no sail outline sizes. The tools, the metric figures and the choice of the non-lead paint he allows are ours.

উপকরণ

35

প্রয়োজনীয় সরঞ্জাম

21

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...