সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)
Woody

তৈরি করেছেন

Woody

14. নভেম্বর 2026NO
৮
০
০
০
০

Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)

S. H. Samuels's ukulele from The Boy Mechanic, Book 3 (1919), made for 30 cents: a Spanish-cedar cigar box rebuilt as a 9 x 6 in body with a 2-1/2 in sound hole, an 11 in cedar or mahogany neck, a notched hardwood bridge, and aluminium frets set by the old rule of 1/18 on a 13 in string length.
মধ্যবর্তী
About 2 days

নির্দেশাবলি

1

Fret table

Jupyter নোটবুক লোড হচ্ছে…
2

Read The Boy Mechanic, Book 3

"The size of this instrument makes it especially suited to the cigar-box type of body construction."
3

Rebuild the box as the body

Take a good Spanish-cedar cigar box about 2-1/2 by 6 by 9 in, soak off the paper without marring the wood, take it apart and trim edges with too many or broken nail holes. Fit the parts so top and bottom rest against the sides and ends, the ends between the sides (Fig. 2; drawn 9 by 6 by 2-1/4 in). Cut a 2-1/2 in hole in the top 3-3/4 in from the neck end. Make corner strips A 1/4 in square and strips B 1/4 by 5/8 by 4-1/2 in for under the top and on the bottom.

এই ধাপের উপকরণ:

সিডার কাঠের তক্তাসিডার কাঠের তক্তা1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

কোপিং করাতকোপিং করাত
চামড়া কাটার ছুরিচামড়া কাটার ছুরি
রান্দারান্দা
দিকনির্ণয় যন্ত্রদিকনির্ণয় যন্ত্র
রুলাররুলার
4

Make the neck, nut and bridge

Cut the neck from Spanish cedar or mahogany, 11 in long, best in one piece (or with the peg extension and the wide body end glued on and doweled): head 4-1/2 in, fingerboard 6-5/8 in from the 1/8 in nut, 1-1/4 in wide at the nut and 1-3/4 in at the body, heel 7/16 in, section 7/8 by 2-1/4 in as drawn (Fig. 3). Make the nut D of mahogany or walnut with the grain lengthwise, notched for the strings as spaced. Make the bridge C of hard wood, 2-1/2 in long and 1/2 in high, hollowed under the notched edge, with a metal string contact.

এই ধাপের উপকরণ:

শক্ত কাঠের তক্তাশক্ত কাঠের তক্তা1 টুকরা
কাঠের গোঁজকাঠের গোঁজ1 টুকরা
পশু আঠাপশু আঠা1 টুকরা
পিতলের ফালিপিতলের ফালি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-করাতহাত-করাত
কোপিং করাতকোপিং করাত
চামড়া কাটার ছুরিচামড়া কাটার ছুরি
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
হাত-ড্রিলহাত-ড্রিল
5

Fret the fingerboard

Measure the string length from the bridge contact to the nut (13 in here). Set the first fret 1/18 of that distance from the nut, the second 1/18 of the distance from the first fret to the bridge, and so on (notebook). Cut grooves 1/8 in deep and drive in frets of aluminium (or brass) 1/16 by 3/16 in, tight enough to need no fastening.

এই ধাপের উপকরণ:

পিতলের ফালিপিতলের ফালি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হাত-করাতহাত-করাত
হ্যাকসহ্যাকস
রেতি (হাতের রেতি)রেতি (হাতের রেতি)
রুলাররুলার
পেনসিলপেনসিল
হাতুড়িহাতুড়ি
6

Assemble and finish

Glue the body's end to the neck with animal glue, reinforced by screws, its upper edge parallel with the fingerboard and the fingerboard flush with the top. Glue the body (without the top) to that end; when dry, glue in the strips, bridge and finally the top. Clean, sandpaper, stain and shellac or varnish. Fit tuning pegs (bought or made) and a set of strings.

এই ধাপের উপকরণ:

পশু আঠাপশু আঠা1 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু1 টুকরা
শিরিষ কাগজশিরিষ কাগজ1 টুকরা
শেলাকের বার্নিশশেলাকের বার্নিশ1 টুকরা
সুর বাঁধার কাঠিসুর বাঁধার কাঠি4 টুকরা
ইউকুলেলের তারইউকুলেলের তার1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

বার ক্ল্যাম্পবার ক্ল্যাম্প
স্ক্রুড্রাইভার - চ্যাপ্টাস্ক্রুড্রাইভার - চ্যাপ্টা
চওড়া রঙের তুলিচওড়া রঙের তুলি
7

Troubleshooting

Ukulele troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Homemade Hawaiian Ukulele" by S. H. Samuels, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 358-359). He gives the box as about 2-1/2 in deep; his drawing shows 2-1/4 in. He names no stain and no string type. The fret table, its equal-temperament comparison and the metric figures are ours.

উপকরণ

10

প্রয়োজনীয় সরঞ্জাম

14

এই ব্লুপ্রিন্ট যা তৈরি করে

সম্পর্কিত ব্লুপ্রিন্ট

এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...