সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য

Ore Crushing Rolls: Hard Shells on Soft Iron Cores, One Roll in Spring-Loaded Boxes, Gap Set by Shims (Richards, Ore Dressing, 1903)
The crushing rolls that took ore from the jaw breaker in a 1900s mill, as Robert Richards described them: two shafts on one cast-iron frame, each carrying a soft-iron core with a replaceable hard shell; one runs in fixed boxes, the other in movable boxes pushed toward it by a nest of steel springs that yields like a safety valve; shims set the gap. Little fines, ideal for soft brittle ores.
উন্নত
Weeks (castings and machining)
নির্দেশাবলি
1
1
His figures
His figures
Jupyter নোটবুক লোড হচ্ছে…
2
2
Read Richards
Read Richards
"The ore is therefore broken by compression."
3
3
Frame and shafts
Frame and shafts
Cast the frame as one piece, both sides joined by end pieces, so settling of the building can't throw the shafts out of line (make it in two parts only if it must travel by mule). Turn two shafts of mild steel or wrought iron, each on two bearings.
এই ধাপের উপকরণ:
ঢালাই লোহার জিনিস1 টুকরা
ইস্পাতের শ্যাফট1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
ঢালাইয়ের হাতা
ধাতুর খরাদ যন্ত্র
যৌগিক কপিকল4
4
Cores and shells
Cores and shells
Force a soft cast-iron core onto each shaft. Krom's way (Fig. 37): two slightly conical half-cores, one shrunk on for good, the other split on one side and drawn in by four draw bolts; half-cores no wider than 4-5 in. Cast hard shells 2-5½ in. thick (chilled iron or steel), with wrought-iron staves cast in if chilled so the slightly conical inside can be turned to fit; turn the face true.
এই ধাপের উপকরণ:
ঢালাই লোহার জিনিস1 টুকরা
পেটানো লোহার দণ্ড1 টুকরা
ষড়ভুজ বোল্টের সংগ্রহ1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
ধাতুর খরাদ যন্ত্র
ঢালাইয়ের হাতা5
5
Boxes, springs and shims
Boxes, springs and shims
Mount one shaft in fixed boxes and the other in movable ones, both babbitted, with shields and a cotton-waste groove against grit. Put a nest of steel spiral springs outside the fixed pillow block, with bolts carrying the force to the movable box, equal on both sides, compressed between plates by two compression bolts. Set the gap with shims and keep them in: the springs should only give when a hard lump comes through.
এই ধাপের উপকরণ:
Coil Spring1 টুকরা
অজানা ধাতু1 টুকরা
ষড়ভুজ বোল্টের সংগ্রহ1 টুকরা
ঢালাই লোহার জিনিস1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
রেঞ্চের সেট
ধাতুর খরাদ যন্ত্র6
6
Drive and run
Drive and run
Drive by belt and pulley (or gears and pulleys for slow coarse work). Feed lumps no bigger than about 1½ in. (4 cm), 2½ in. at most, evenly with a feeder so a rush of ore does not choke it.
এই ধাপের উপকরণ:
কপিকল1 টুকরা
ড্রাইভ বেল্ট1 টুকরাপ্রয়োজনীয় সরঞ্জাম:
রেঞ্চের সেট7
7
Troubleshooting
Troubleshooting
Crushing rolls troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From Robert H. Richards, *Ore Dressing* vol. I (1903), Chapter III, §§ 71-85, pp. 62-74, Fig. 37 and Tables 34-39 (checked on the archive.org scan oredressing01richuoft; p. 62 from its text layer). Rubber springs were the cheap short-life option; levers and weights had nearly gone out of use. Richards surveys machines from many makers rather than one design: building from castings, the size and metric are ours, and the babbitt alloy has no head yet.
উপকরণ
8- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 2 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
- 1 টুকরাপ্লেসহোল্ডার
প্রয়োজনীয় সরঞ্জাম
4- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
- প্লেসহোল্ডার
এই ব্লুপ্রিন্ট যা তৈরি করে
সম্পর্কিত ব্লুপ্রিন্ট
এই ব্লুপ্রিন্টগুলি জ্ঞান ভাগ করে — কৌশল, উপকরণ বা নীতি
CC0 পাবলিক ডোমেন
এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।
মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।


