সহযোগিতা
কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Tube-Track Pedal Saw Table: Any Portable Saw Clamped Upside Down on a Carriage Rolling Inside Slotted Tubes (Tomlinson & Bearden, 1931)
Forge

তৈরি করেছেন

Forge

13. নভেম্বর 2026NO
৬
০
০
০
০

Tube-Track Pedal Saw Table: Any Portable Saw Clamped Upside Down on a Carriage Rolling Inside Slotted Tubes (Tomlinson & Bearden, 1931)

William A. Tomlinson and Howell B. Bearden of Phoenix, Arizona, received US 1,813,783, dated 7 July 1931, for a table that turns any portable power saw into a table saw. The saw is clamped upside down on a carriage, its blade through the slot of a top hinged at the rear. The carriage rolls on ball-bearing rollers inside two steel tubes slotted along their undersides. A pedal pushes it forward through the work, leaving both hands free, and a spring brings it back. With the pedal left alone it works as a fixed saw, and the saw unbolts for hand use. The patent gives no sizes; every size here is ours.
উন্নত
About 4 days

নির্দেশাবলি

1

Pedal, link and travel

Jupyter নোটবুক লোড হচ্ছে…
2

Read US 1,813,783

"By using the pedal in the manner above set forth both hands of the operator will be free for manipulating the work, which is especially desirable when pattern work is to be sawed."
3

Angle-iron frame

Bolt a frame of steel angle 900 x 500 mm, 850 high: four corner legs 1, side and end bars 2, 3 halfway up and 4, 5 at the top, flat-bar diagonal braces 6 at the top corners, a cross bar 7 between the rear legs above the middle bars, and a cross bar 8 between the front legs at the bottom. Drill a vertical row of 9 mm holes 13, 25 mm apart, near the top of each leg, for the track hangers.

এই ধাপের উপকরণ:

নরম ইস্পাতের কোণ-লোহানরম ইস্পাতের কোণ-লোহা6 টুকরা
নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
ষড়ভুজ বোল্টের সংগ্রহষড়ভুজ বোল্টের সংগ্রহ40 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম40 টুকরা
সমতল ওয়াশারসমতল ওয়াশার40 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হ্যাকসহ্যাকস
অ্যাঙ্গেল গ্রাইন্ডারঅ্যাঙ্গেল গ্রাইন্ডার
স্তম্ভযুক্ত তুরপুন যন্ত্রস্তম্ভযুক্ত তুরপুন যন্ত্র
ড্রিল-বিট সেটড্রিল-বিট সেট
কেন্দ্র-ছিদ্রককেন্দ্র-ছিদ্রক
যৌগিক স্কোয়্যারযৌগিক স্কোয়্যার
ফিতা-মাপফিতা-মাপ
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
সুরক্ষা চশমাসুরক্ষা চশমা
4

Slotted tube tracks

Cut two 900 mm lengths of 42 mm steel tube 9, 10 and cut a 10 mm slot 14 along the underside of each, stopping 20 mm short of the ends; file the slot's edges smooth. Bolt a flat-bar hanger 11 to each end of each tube and hang the tubes along the frame's sides from the legs with bolts 12 through the row of holes, at the height that suits your saw. Put a short coil spring 39 in each end of each tube as a buffer.

এই ধাপের উপকরণ:

মৃদু ইস্পাতের গোল নলমৃদু ইস্পাতের গোল নল2 টুকরা
নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
Coil SpringCoil Spring4 টুকরা
ষড়ভুজ বোল্টের সংগ্রহষড়ভুজ বোল্টের সংগ্রহ8 টুকরা
ষড়ভুজ বাদামষড়ভুজ বাদাম8 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হ্যাকসহ্যাকস
অ্যাঙ্গেল গ্রাইন্ডারঅ্যাঙ্গেল গ্রাইন্ডার
উকো-সেটউকো-সেট
বেঞ্চ ভাইসবেঞ্চ ভাইস
স্তম্ভযুক্ত তুরপুন যন্ত্রস্তম্ভযুক্ত তুরপুন যন্ত্র
ড্রিল-বিট সেটড্রিল-বিট সেট
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
ডিজিটাল ক্যালিপার ৬ ইঞ্চিডিজিটাল ক্যালিপার ৬ ইঞ্চি
সুরক্ষা চশমাসুরক্ষা চশমা
5

Carriage and rollers

Cut the carriage 30 from 5 mm steel plate, as wide as between the tubes. At each corner bolt an upright flat-bar standard 31 that reaches up through a tube's slot, and on its top a short bar 33 across inside the tube carrying a 22 mm ball bearing 32 at each end on an M8 bolt with a lock nut. Slide the rollers into the tubes from the ends, the standards hanging down through the slots, and bolt them to the carriage.

এই ধাপের উপকরণ:

নরম ইস্পাতের প্লেটনরম ইস্পাতের প্লেট1 টুকরা
নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
বল বেয়ারিংবল বেয়ারিং8 টুকরা
ষড়ভুজ বোল্টের সংগ্রহষড়ভুজ বোল্টের সংগ্রহ16 টুকরা
নাইলন-ভরা লক নাটনাইলন-ভরা লক নাট8 টুকরা
সমতল ওয়াশারসমতল ওয়াশার16 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হ্যাকসহ্যাকস
অ্যাঙ্গেল গ্রাইন্ডারঅ্যাঙ্গেল গ্রাইন্ডার
স্তম্ভযুক্ত তুরপুন যন্ত্রস্তম্ভযুক্ত তুরপুন যন্ত্র
ড্রিল-বিট সেটড্রিল-বিট সেট
উকো-সেটউকো-সেট
বেঞ্চ ভাইসবেঞ্চ ভাইস
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
6

Pedal and springs

Pivot a lever 21 of steel flat bar on the front bottom cross bar 8, with an arm 22 to the side carrying the pedal 20 and a brace 23 from arm to lever. Join the lever's top to the carriage's front with a flat-bar link 24. Hook a return spring 25a from the rear cross bar 7 to the lever partway up.

এই ধাপের উপকরণ:

নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা2 টুকরা
নরম ইস্পাতের গোল দণ্ডনরম ইস্পাতের গোল দণ্ড1 টুকরা
টান-স্প্রিংটান-স্প্রিং1 টুকরা
ষড়ভুজ বোল্টের সংগ্রহষড়ভুজ বোল্টের সংগ্রহ4 টুকরা
নাইলন-ভরা লক নাটনাইলন-ভরা লক নাট4 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হ্যাকসহ্যাকস
স্তম্ভযুক্ত তুরপুন যন্ত্রস্তম্ভযুক্ত তুরপুন যন্ত্র
ড্রিল-বিট সেটড্রিল-বিট সেট
বেঞ্চ ভাইসবেঞ্চ ভাইস
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
7

Mount the saw and the top

Turn the circular saw upside down on the carriage and bolt it by its base plate with bolts and wing nuts, so it lifts off for hand use; his T-bolt 34 and hook bolts 36 gripped the saw's handles, which modern saws do not suit. Make the top 42 of plywood on a steel angle frame 44, slotted along the blade's path, and hinge its rear edge to the frame so it swings up to reach the saw. Fit a catch 47 to lock it down and a folding flat-bar brace 49 to prop it up.

এই ধাপের উপকরণ:

গোলাকার করাতগোলাকার করাত1 টুকরা
ষড়ভুজ বোল্টের সংগ্রহষড়ভুজ বোল্টের সংগ্রহ4 টুকরা
প্রজাপতি নাটপ্রজাপতি নাট4 টুকরা
প্লাইউডের পাতপ্লাইউডের পাত1 টুকরা
নরম ইস্পাতের কোণ-লোহানরম ইস্পাতের কোণ-লোহা1 টুকরা
দরজার কবজাদরজার কবজা2 টুকরা
হুক ও আইহুক ও আই1 টুকরা
নরম ইস্পাতের চ্যাপ্টা পাটানরম ইস্পাতের চ্যাপ্টা পাটা1 টুকরা
কাঠের স্ক্রুকাঠের স্ক্রু16 টুকরা

প্রয়োজনীয় সরঞ্জাম:

জিগস করাতজিগস করাত
তারবিহীন তুরপুনতারবিহীন তুরপুন
ড্রিল-বিট সেটড্রিল-বিট সেট
হ্যাকসহ্যাকস
সমন্বয়যোগ্য রেঞ্চসমন্বয়যোগ্য রেঞ্চ
যৌগিক স্কোয়্যারযৌগিক স্কোয়্যার
8

Cut

Lock the top down. Set the saw's depth so the blade stands 10 mm above the board. Place the board on the top in front of the blade, start the saw and press the pedal: the carriage rolls the running blade through it while both hands hold the work. Let the pedal up and the spring returns it. For ripping, leave the carriage still and feed the board.

প্রয়োজনীয় সরঞ্জাম:

সুরক্ষা চশমাসুরক্ষা চশমা
শ্রবণ-রক্ষক (কান-ঢাকনা, SNR 30 dB)শ্রবণ-রক্ষক (কান-ঢাকনা, SNR 30 dB)
9

Troubleshooting

Tube-track saw table troubleshooting.

Flow

Loading...
10

History and honest limits

**William A. Tomlinson** and **Howell B. Bearden** of Phoenix, Arizona, US 1,813,783, dated 7 July 1931, filed 5 December 1928. They claimed a top with a slot, "laterally spaced longitudinally extending tubular tracks" below it, "slotted longitudinally on their lower faces", and a saw carriage with upstanding roller-carrying hangers in the tracks, their shanks through the slots. Their saw is held by its handles; ours by its base plate. Their frame is angle iron, as ours. They give no sizes; every size here is ours.

উপকরণ

18

প্রয়োজনীয় সরঞ্জাম

15

এই ব্লুপ্রিন্ট যা তৈরি করে

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...