কলা
সৌন্দর্য এবং সুস্থতা
ক্রাফট
সংস্কৃতি ও ইতিহাস
বিনোদন
পরিবেশ
খাদ্য ও পানীয়
রিভার্স ইঞ্জিনিয়ারিং
বিজ্ঞান
খেলাধুলা
টেকনোলজি
পরিধানযোগ্য
Toothed-Disk Potato Masher: Teeth Split It, Holes Take It
Forge

তৈরি করেছেন

Forge

6. অক্টোবর 2026NO
৮
০
০
০
০

Toothed-Disk Potato Masher: Teeth Split It, Holes Take It

A perforated masher only pushes; firm pieces roll away from the holes. George A. Anderson and Charles J. Baker of Albany, New York, received US 108,083, dated 11 October 1870, for a utensil for preparing potatoes and meat: a metal disk with several series of incising teeth and perforations placed alternate, the teeth's width radial; pressed down, "the incisors ... will enter the vegetables and split them at each point in contact, when the broken portions of the vegetables operated upon will rise up and pass through the openings." This rung works out the teeth and open area, then prints the disk, fits a handle, and mashes potatoes.
শিক্ষানবিশ
About 1 hour, plus printing

নির্দেশাবলি

1

Teeth and open area

Jupyter নোটবুক লোড হচ্ছে…
2

A perforated disk before it

The embedded blueprint mashes through a perforated disk. Anderson and Baker put teeth between the holes to split the potato first.
3

Read US 108,083

"We prefer to have the said incisors c to have their width run in the direction of the radii of a circle, as shown in fig. 1, which would strengthen the rim, inclosing the outer series of perforations a with the rim inclosing the inner series of perforations a, and permit the metal of the disk A being made lighter."
4

Print the disk

Print the disk with its teeth and socket (/uploads/blueprints/toothed-disk-potato-masher-disk.stl) socket down, teeth up. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

এই ধাপের উপকরণ:

PETG ফিলামেন্টPETG ফিলামেন্ট1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

ফিলামেন্টের 3D প্রিন্টার (FDM)ফিলামেন্টের 3D প্রিন্টার (FDM)
5

Fit the handle

Epoxy a 16 mm hardwood dowel 170 mm long into the socket.

এই ধাপের উপকরণ:

শক্ত কাঠের গোঁজশক্ত কাঠের গোঁজ1 টুকরা
দুই উপাদানের ইপক্সিদুই উপাদানের ইপক্সি1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

হ্যাকসহ্যাকস
ডিজিটাল ক্যালিপার ৬ ইঞ্চিডিজিটাল ক্যালিপার ৬ ইঞ্চি
6

The build in 3D

FreeCAD model of this build, not of the patent: an 84 mm disk with 8 inner and 14 outer radial incisors alternating with as many round holes, its socket and handle.
নকশা ফাইলBLENDCC0 - Free
7

Mash firm potatoes

Boil 500 g of potatoes in their skins for about 25 minutes until a knife slides in; drain. Mash half with the toothed disk and time it to no lumps; compare with the yielding-disk masher if you built it.
ধাপ 7 - Image 1

এই ধাপের উপকরণ:

আলুআলু1 টুকরা
জলজল1 টুকরা

প্রয়োজনীয় সরঞ্জাম:

উঁচু দেয়ালের হাঁড়িউঁচু দেয়ালের হাঁড়ি
স্টেনলেস স্টিলের বড় মেশানোর বাটিস্টেনলেস স্টিলের বড় মেশানোর বাটি
স্টপওয়াচস্টপওয়াচ
8

Teeth that bend, holes that clog

Toothed-disk potato masher troubleshooting.

Flow

Loading...
9

History and honest limits

**George A. Anderson** and **Charles J. Baker** of Albany, New York, received US 108,083, dated 11 October 1870. Two opposite sides of each perforation depend below the disk as the incisors; any suitable handle may be fixed by a socket, upright or at an angle. They named meat as well as potatoes. **Honest limits.** A printed disk stands in for their metal one. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.

উপকরণ

5
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • প্লেসহোল্ডার
  • 1 টুকরা
    প্লেসহোল্ডার
  • 1 টুকরা
    প্লেসহোল্ডার

প্রয়োজনীয় সরঞ্জাম

6

ডিজাইন ফাইল

1

CC0 পাবলিক ডোমেন

এই ব্লুপ্রিন্ট CC0-এর অধীনে প্রকাশিত। আপনি অনুমতি ছাড়াই যেকোনো উদ্দেশ্যে এটি অনুলিপি, পরিবর্তন, বিতরণ ও ব্যবহার করতে পারেন।

মেকারের ব্লুপ্রিন্টের মাধ্যমে পণ্য কিনে তাঁকে সমর্থন করুন, যেখানে তিনি আয় করেন মেকার কমিশন বিক্রেতাদের নির্ধারিত, অথবা এই ব্লুপ্রিন্টের একটি নতুন সংস্করণ তৈরি করে নিজের ব্লুপ্রিন্টে সংযোগ হিসেবে যুক্ত করে আয় ভাগ করুন।

আলোচনা

(0)

লগ ইন করুন আলোচনায় যোগ দিতে

মন্তব্য লোড হচ্ছে...