Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)
Woody

Criado por

Woody

14. novembro 2026NO
4
0
0
0
0

Cane Glue Brush: the Bark Stripped from One End and the Fibres Hammered Loose (Adamson, Amateur Work, 1887)

The fret-cutter's glue brush recommended by D. B. Adamson in Amateur Work (1887): a piece of cane with the hard outer skin cut away at one end and the end hammered until the fibres loosen into a stiff brush, "better than any other" for rubbing glue into wood.
Iniciante
A few minutes

Instruções

1

Read Adamson

"Nothing is better than a piece of cane beaten out at one end."
2

Strip the end

Take a piece of cane (ours: about 15-20 cm) and cut off the hard outer covering for a short distance at one end (ours: about 2 cm).

Materiais para este passo:

RotimRotim1 peça

Ferramentas necessárias:

X-ato de oficinaX-ato de oficina
3

Beat out the fibres

Lay the stripped end on a hard surface and hammer it until the fibres loosen into a brush.

Ferramentas necessárias:

MarteloMartelo
4

Use it

Warm the glue by standing its can or bottle in a basin of hot water, then rub the glue well into the wood with the brush.

Materiais para este passo:

ÁguaÁgua1 peça

Ferramentas necessárias:

BaldeBalde
ColaCola
5

Troubleshooting

Cane brush troubleshooting.

Flow

Loading...
6

History and honest limits

From D. B. Adamson, "Fretsaw Work and Marquetry Cutting" III, **Amateur Work, Illustrated**, vol. VII (1887), p. 230 (checked on the archive.org scan amateurworkillus71887lond). He gives no lengths: those and the knife are ours.

Materiais

2
  • 1 peça
    Referência
  • 1 peça
    Referência

Ferramentas necessárias

4
  • Referência
  • Referência
  • Referência
  • Referência

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...