Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Mine Suction Pump of Bored Logs: Perforated Trunk, Valve Box and Leather-Shoe Piston (Agricola, 1556)
Agricola's first suction pump for draining mine sumps, from De Re Metallica, Book VI (1556): logs bored into pipes stand on a perforated trunk two feet deep in the sump, with a bottomless metal valve box one palm deep; a workman on the flooring works a piston whose leather shoe, or better a perforated iron or wooden disc, lifts the water to a spout into the tunnel drain.
Avançado
Several days
Instruções
1
1
Units and lift
Units and lift
A carregar o notebook Jupyter…
2
2
Read De Re Metallica, Book VI
Read De Re Metallica, Book VI
"Thus the workman, eager at his labour, standing on the flooring boards, pushes the piston down into the pipe and draws it out again."
3
3
Bore the pipes
Bore the pipes
Bore straight logs through their length to make the pipe, first with a borer with an auger and then with a wider borer (Illustration 177, O-Q). Use one length, or two with one joined into the other.
Materiais para este passo:
Tronco2 peçasFerramentas necessárias:
Trado
Verruma de mão
Machado
Faca de dois cabos4
4
Make the trunk and valve box
Make the trunk and valve box
Make a trunk two feet deep, hollow like the pipe, its lower opening blocked with a round piece of wood and its sides perforated round about so water flows in. Make a box of iron, copper or brass one palm deep, without a bottom, closed by a rounded valve that stops the raised water running back. Set it in the top of the trunk if there is one pipe, or in the lower pipe at the joint if there are two.
Materiais para este passo:
Tronco1 peça
Tábua de madeira de lei1 peça
Chapa de aço macio1 peça
Couro para arreios1 peçaFerramentas necessárias:
Trado
Formões
Serra de arco para metais
Martelo
Forja
Bigorna5
5
Set the pipe
Set the pipe
Lay a flooring over the sump. Let the pipe down through it to the bottom of the sump with the trunk on its lower end, and fix it with pointed iron clamps driven in straight on both sides. Cut an opening or spout in the upper pipe reaching to the drain of the tunnel.
Materiais para este passo:
Tábua de pinho4 peças
Barra chata de aço macio2 peças
Pregos1 peçaFerramentas necessárias:
Serrote
Martelo
Trado6
6
Make the piston
Make the piston
Fit the piston rod with a hand-bar at the top. At the bottom fix either a shoe, a leather covering stitched almost cone-shaped, tight round the rod and wide open at the top, or (far better) a disc of iron one digit thick or of wood six digits thick, fixed by an iron key through the rod or screwed on, with five or six round or oval openings in a star and a cover over them, the same diameter as the inside of the pipe.
Materiais para este passo:
Tábua de madeira de lei1 peça
Couro para arreios1 peça
Chapa de aço macio1 peça
Barra chata de aço macio1 peçaFerramentas necessárias:
Sovela
Duas agulhas de correeiro
Berbequim de mão
Limas (lima de mão)
Serrote7
7
Pump
Pump
Standing on the flooring, push the piston down and draw it up. On the up-stroke the cover closes the disc openings and the water above is lifted to the spout, while the valve of the box opens and water from the trunk rises by suction; on the down-stroke the valve closes and the water passes up through the disc.
8
8
Troubleshooting
Troubleshooting
Suction pump troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Georgius Agricola, **De Re Metallica** (1556), Book VI, translated by Herbert C. and Lou H. Hoover, 1912 (Gutenberg 38015; checked on the archive.org scan georgiusagricola00agri, pp. 176-177). He gives no bore, pipe length or lift. The metric equivalents of his Roman units, the suction limit and the tools are ours.
Materiais
7- 2 peçasReferência
- 1 peçaReferência
- 1 peçaReferência
- 2 peçasReferência
- 4 peçasReferência
- 2 peçasReferência
- 1 peçaReferência
Ferramentas necessárias
14- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

