Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Air Compressor: Twin Pump-Cylinder, Water-Cooled (Shop Notes, 1912)
A simple compressor that fills a tank to about 50 lb: two bought cast-iron well-pump cylinders, 2 1/2 in bore, driven alternately by a rocking arm from a crank, with check valves in and out and a water jacket pipe to cool them.
Source: Popular Mechanics Shop Notes for 1912, pp. 1708-1709. Unknown: tank, pipe sizes. Picture: Figs. 1-2 of the book.
Intermediário
Unknown
Instruções
1
1
Pipe the two cylinders
Pipe the two cylinders
Take two ordinary cast-iron open-well pump cylinders, 2 1/2 in bore, bought complete with guide rods and plungers. Join their open ends with tees to a cross pipe C, and fit a packing box from an old valve (A, B) into each tee so the plunger rods D and E pass through (Fig. 1).
Materiais para este passo:
Metal desconhecido2 pump cylinders with plungers
Tubo de aço (de parede grossa, com roscas)1 pipe C
Acessório roscado para tubagem2 tees
Vedação desconhecida2 packing boxesFerramentas necessárias:
Chave de tubos2
2
Fit the valves
Fit the valves
On the outer end of each cylinder fit an inlet check valve (H, I) and an outlet valve (J, K), the outlets joined to pipe L running to the tank.
Materiais para este passo:
Válvula de retenção4 H, I, J, K
Tubo de aço (de parede grossa, com roscas)1 pipe L
Acessório roscado para tubagem1 peça
Material desconhecido1 air tankFerramentas necessárias:
Chave de tubos3
3
Water-cool it
Water-cool it
Run cooling water through pipe C, set by valve M in and valve N out, so there is no pressure on the water to push it into the air chambers O and P.
Materiais para este passo:
Válvula de globo2 M and NFerramentas necessárias:
Água
Chave de tubos4
4
Fit the crank drive
Fit the crank drive
Drive it from a shaft (Fig. 2): crank S works an arm pivoted at its centre T, and the plunger rods D and E attach to the arm's ends U and V.
Materiais para este passo:
Metal desconhecido1 crank, arm
Parafuso de cabeça hexagonal - classe 8.81 pivot and rod pins, number not givenFerramentas necessárias:
Berbequim de mão
Chave inglesa ajustávelMateriais
8- 1 crank, armReferência
- Referência
- Referência
- 2 packing boxesReferência
- 4 H, I, J, KReferência
- 1 air tankReferência
- 2 M and NReferência
- 1 pivot and rod pins, number not givenReferência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
