Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)
Charlie

Criado por

Charlie

4. novembro 2026DE
9
0
0
0
0

Aluminium Oxide Abrasive Grit: Alundum by Jacobs's Process (Stansfield, 1914)

Alundum, the artificial corundum made at Niagara Falls by the Norton Company: bauxite, calcined to drive off its water, is fused in an electric arc furnace with about 5 per cent carbon, which reduces its iron, silicon and titanium to metal nodules; the fused alumina cools slowly into a hard crystalline mass that is crushed and sized as abrasive grit. Bauxite melts near 2,000 °C and could not be melted commercially without the electric furnace. Source: A. Stansfield, The Electric Furnace, 2nd ed. (1914), pp. 357-358. Picture: the book's Fig. 143, the Higgins alundum furnace.
Avançado
Unknown

Instruções

1

Calcine the bauxite

Calcine the bauxite in a rotary kiln to drive off its combined water.

Materiais para este passo:

BauxitaBauxita1 peça

Ferramentas necessárias:

Forno rotativoForno rotativo
2

Fuse in the arc furnace

Strike arcs between the electrodes and the carbon lining of the furnace bottom, then feed the calcined bauxite, with about 5 per cent carbon, in round the arcs; it melts and in time carries the current between the two arcs. Lower the water-cooled shell as the fused alundum builds up; the lower part solidifies as it fills.

Materiais para este passo:

CarbonoCarbono1 about 5 per cent

Ferramentas necessárias:

Forno elétrico a arcoForno elétrico a arco
3

Cool slowly

When the shell is full, lift it with its contents off the base, put another shell in place, and let the alundum cool slowly so it grows into a hard, tough crystalline mass.

Ferramentas necessárias:

Forno elétrico a arcoForno elétrico a arco
4

Crush, separate and size

Break up and crush the mass, separate the nodules of reduced metal mechanically, and size the grains for use as an abrasive.

Ferramentas necessárias:

Britador de rochaBritador de rocha
Conjunto de peneiras (malha graduada)Conjunto de peneiras (malha graduada)

Materiais

2
  • 1 peça
    Referência
  • 1 about 5 per cent
    Referência

Ferramentas necessárias

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...