ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
FUTURO VERDE
ENGENHARIA REVERSA
PROJETOS ESCOLARES
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Testing a Gold Crown with Water — Archimedes' Buoyancy and the Eureka Method
Penny

Criado por

Penny

2. julho 2026DK
14
0
0
0
0

Testing a Gold Crown with Water — Archimedes' Buoyancy and the Eureka Method

King Hiero of Syracuse suspected his goldsmith had cut his crown with cheaper silver, but how do you check without melting it down? Around 250 BC Archimedes solved it in the bath: stepping in, he saw the water rise by his own volume and realised a submerged object displaces its own volume of water. Density — weight divided by volume — then betrays any cheating, because gold is far denser than silver. This blueprint reproduces both the famous displacement test and Archimedes' more precise underwater-balance method, and states the buoyancy principle that floats every ship.
Intermediário
2

Instruções

1

Understand the problem

You must find whether a crown is pure gold without damaging it. The key is density — weight divided by volume. Pure gold is very dense (about 19.3 g/cm³); gold mixed with lighter silver (about 10.5 g/cm³) is less dense, so the same weight of it takes up more space.
2

The Eureka insight

When a solid is lowered into water it pushes aside — displaces — exactly its own volume of water. So even an oddly shaped crown's volume can be measured by how much water it displaces. This is what Archimedes realised watching the bath overflow.
3

Set up an equal-arm balance

Hang a balance scale, or make an equal-arm balance from a rod and string with a small pan on each end, so it swings level and can compare two weights precisely.

Ferramentas necessárias:

Balance ScaleBalance Scale
4

Balance the crown against pure gold in air

On the balance, set the crown against an equal weight of known pure gold, in air, until the two sides hang exactly level. Now they weigh the same — the only question left is whether they take up the same volume.

Materiais para este passo:

Crude Lead Ingot (from galena smelting)Crude Lead Ingot (from galena smelting)1 peça

Ferramentas necessárias:

Balance ScaleBalance Scale
5

Submerge both in water

Lower both objects, still on the balance, into a vessel of water. Each is pushed up by a buoyant force equal to the weight of the water it displaces — the bulkier object is pushed up harder.

Materiais para este passo:

WaterWater5 litros

Ferramentas necessárias:

Clean Glass Jars with LidsClean Glass Jars with Lids
Cotton Kitchen StringCotton Kitchen String
6

Read the verdict

If the crown is pure gold it has the same volume as the gold and the balance stays level under water. If it is adulterated with lighter silver it is bulkier, displaces more water, is buoyed up more, and its side rises — proof the crown is not pure gold.

Ferramentas necessárias:

Balance ScaleBalance Scale
7

Or measure density directly

The simpler displacement version: weigh the crown, then submerge it in a brim-full vessel and measure the overflow — that volume is the crown's volume. Density = weight ÷ volume. Compare to pure gold's 19.3 g/cm³; an adulterated crown reads lower.

Ferramentas necessárias:

Clean Glass Jars with LidsClean Glass Jars with Lids
8

State Archimedes' principle

Any body in a fluid is pushed up by a force equal to the weight of the fluid it displaces. That single law tells the crown from a fake, floats a loaded ship, and lifts a balloon — one of the oldest exact laws of physics, from around 250 BC.

Materiais

2

Ferramentas necessárias

3

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...