Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Folding Clothes Tree: Arms Pivoted Between Spaced Uprights, Held Level by Stop-Blocks (Bidwell, 1905)
Woody

Criado por

Woody

13. novembro 2026NO
7
0
0
0
0

Folding Clothes Tree: Arms Pivoted Between Spaced Uprights, Held Level by Stop-Blocks (Bidwell, 1905)

Moses Bidwell of Brooklyn received US 805,051, dated 21 November 1905, for a clothes tree that folds flat. Separate uprights, spaced apart by blocks, make a light, strong open column; arms pivoted between them swing out level to hang clothes, held up by a short tail that catches under a block, and swing down along the column to store. We make it from hardwood. All sizes are ours.
Iniciante
About 5 hours

Instruções

1

Arm and pivot

A carregar o notebook Jupyter…
2

Read US 805,051

"The upright portion is, when completed, of truss or bridge like construction; hence, though light, is very strong."
3

Make the column

Cut four hardwood uprights (his 2) to the height wanted. Join them into a square open column with short stop-blocks (his 3) glued and screwed between them at intervals, leaving a gap between each pair of uprights wide enough for an arm to swing in.

Materiais para este passo:

Ripa de madeira duraRipa de madeira dura1 peça
Tábua de madeira de leiTábua de madeira de lei1 peça
Cola de madeiraCola de madeira1 peça
Parafusos para madeiraParafusos para madeira1 peça

Ferramentas necessárias:

Fita métricaFita métrica
SerroteSerrote
Berbequim de mãoBerbequim de mão
Conjunto de chaves de fendasConjunto de chaves de fendas
4

Make and hang the arms

Cut the arms (his 4) from hardwood strip and round their outer ends. Bore each near its inner end and hang it on a bolt through the pair of uprights, his pivot 5, so the short tail below the pivot (his 4a) catches under the stop-block above it when the arm is swung out level. Place the arms so they balance one another round the column.

Materiais para este passo:

Ripa de madeira duraRipa de madeira dura1 peça
Parafuso de carroçariaParafuso de carroçaria1 peça

Ferramentas necessárias:

SerroteSerrote
Arco de pua e brocaArco de pua e broca
LixaLixa
Chave inglesa ajustávelChave inglesa ajustável
5

Make the base

Make a cross base of hardwood (his base 1, "of any suitable form") and fix the column upright in its centre.

Materiais para este passo:

Tábua de madeira de leiTábua de madeira de lei1 peça
Cola de madeiraCola de madeira1 peça
Parafusos para madeiraParafusos para madeira1 peça

Ferramentas necessárias:

SerroteSerrote
Arco de pua e brocaArco de pua e broca
Conjunto de chaves de fendasConjunto de chaves de fendas
6

Use and fold it

Swing the arms out until their tails stop under the blocks; hang coats and hats. Lift each arm and swing it down along the column to fold the tree away.
7

Troubleshooting

Clothes tree troubleshooting.

Flow

Loading...
8

History and honest limits

**Moses Bidwell** of Brooklyn, US 805,051, dated 21 November 1905, filed 11 April 1905. He claimed "a clothes-tree comprising a skeleton-like body composed of a plurality of separate upright members, stop-blocks at frequent intervals between said members spacing them apart and rigidly connecting the same, swinging arms pivoted near their ends to said upright members adjacent to said stop-blocks". He gives no sizes or wood: the hardwood, four uprights, all sizes, bolts and the cross base are ours.

Materiais

5

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...