Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Blackfoot Parfleche: Rawhide Pegged Out, Fleshed, Painted While Staked, Scraped Even, Cut and Folded Like an Envelope (Wissler, 1910)
The Blackfoot (Niitsitapi) parfleche as Clark Wissler recorded it: a cow or buffalo hide pegged out hair side down, fleshed, sun-cured, painted with several parfleche designs at once while still staked, planed even with an adze-like scraper, then cut out, folded like an envelope and closed with rawhide laces. It held pemmican, dried meat and berries.
Intermediário
A week, mostly sun-curing
Instruções
1
1
Read Wissler
Read Wissler
"Its simplicity of construction is inspiring and its usefulness scarcely to be over-estimated."
2
2
Peg out and flesh
Peg out and flesh
Stretch the fresh hide on the ground hair side down and peg it with wooden stakes. Rake and hack off the flesh and fat with a fleshing tool; if the hide stiffens, wet it with warm water.
Materiais para este passo:
Couro cru1 peça
Água1 peçaFerramentas necessárias:
Estaca de tenda
Maço de madeira
Descarnadeira3
3
Cure in the sun
Cure in the sun
Leave it to cure and bleach in the sun for some days, now and then pouring warm water over it.
Materiais para este passo:
Água1 peçaFerramentas necessárias:
Estaca de tenda4
4
Lay out and paint
Lay out and paint
While it is still staked, mark out as many parfleche as the hide will take (his Fig. 45: a 160 cm steer hide with two parfleche, two bags and three toy parfleche) and paint the designs. Ours: earth paints with a little water, laid on with a brush.
Materiais para este passo:
Ocre em bruto1 peça
Pigmento de ocre amarelo (cru)1 peça
Carvão vegetal1 peçaFerramentas necessárias:
Pincéis finos
Faca5
5
Scrape it even
Scrape it even
Pull the stakes and lay the stiff hide in shade. Stand on it, lean over and plane the flesh side down to an even thickness with an adze-like scraper, sideways strokes taking off chips and shavings; turn it and scrape the hair off the same way.
Ferramentas necessárias:
Enxó6
6
Cut, fold and lace
Cut, fold and lace
Mark the outlines with a knife point and cut them out (Fig. 46: a long rectangle with a big flap; sides irregular). Trim, and make pairs of lace holes (ours: a punch). Fill it by putting the contents in the middle, fold the big flap over and lace it, turn in the ends and lace them, then tie it shut with the looped thongs. Blackfoot ones average 60 x 38 cm.
Materiais para este passo:
Tira de couro cru1 peçaFerramentas necessárias:
Faca
Vazador para couro7
7
Troubleshooting
Troubleshooting
Parfleche troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From Clark Wissler, *Material Culture of the Blackfoot Indians*, **Anthropological Papers of the American Museum of Natural History** vol. V (1910), pp. 63-64, 79-81 and Figs. 45-47 (checked on the archive.org scan materialcultureo00wiss). By 1910 parfleche were kept as mementos of buffalo days and given as gifts, often ending up cut into moccasin soles. Wissler does not say what paints were used here; the paints, brush and punch are ours.
Materiais
6- 1 peçaReferência
- 2 peçasReferência
- 1 peçaReferência
- Referência
- 1 peçaReferência
- 1 peçaReferência
Ferramentas necessárias
7- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

Navajo Buckskin: Hair Shaved with the Deer's Own Foreleg Bone, Brains Rubbed In, Wrung on a Tree, Worked Dry over the Feet (Shufeldt, 1888)
por Tex
Têxtil e Couro
4
0
0
0
0
0

Blackfoot Face Paints: Yellow Earth Burned Red, Earths Applied Wet or Worked into Tallow on the Face (Wissler, 1910)
por Charlie
Pintura
3
0
0
0
0
0
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
