ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Boric Oxide: Boric Acid Heated Slowly Past 300 °C
Boric oxide, a main part of borosilicate glass, is boric acid with its water driven off. Heated, boric acid gives off steam at about 170 °C and turns to metaboric acid; above 300 °C it loses the rest and leaves a clear glassy oxide. Heat it slowly, or it froths and gums.
The picture: boron trioxide in a vial.
Intermediário
A day
Instruções
1
1
First heat
First heat
Weigh the boric acid into an iron crucible and warm it gently to about 170 °C, checked with the pyrometer, stirring, while it gives off steam.
Materiais para este passo:
Ácido bórico200 gFerramentas necessárias:
Balança de pratos
Cadinho de ferro
Forno de carvão vegetal
Carvão vegetal
Pirómetro
Vareta de ferro
Luvas de soldador
Óculos de segurança2
2
Over 300 °C
Over 300 °C
Raise the heat slowly above 300 °C. More steam comes off; go slowly so it does not froth up and gum. Hold it until no more steam rises and it settles to a clear glass.
Ferramentas necessárias:
Forno de carvão vegetal
Pirómetro
Vareta de ferro
Tenaz para cadinho
Luvas de soldador
Óculos de segurança3
3
Crush and store
Crush and store
Let it cool, break the glassy cake out, crush it to powder, weigh it and keep it in a closed jar (ours).
Ferramentas necessárias:
Almofariz e pilão
Balança de pratos
Frasco de vidro
Máscara antipoeiras4
4
Oxide from your acid
Oxide from your acid
A carregar o notebook Jupyter…
Materiais
1- 200 gReferência
Ferramentas necessárias
12- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

