Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)
F. E. Kennar's wooden skates from The Boy Mechanic, Book 2 (1915), made "to take the place of the usual steel-runner kind" and to prevent sprained ankles: two hardwood runners nailed under a 4 in board, held apart by blocks and bolts, with corner pieces to locate the shoe and straps to hold it. Make two alike.
Iniciante
About 3 hours
Instruções
1
1
His sizes in centimetres
His sizes in centimetres
A carregar o notebook Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"Skates that will take the place of the usual steel-runner kind and which will prevent spraining of the ankles, can be made of a few pieces of 1/2-in. hardwood boards."
3
3
Cut the runners
Cut the runners
From 1/2 in hardwood, cut four runners 2 in wide at the back and 1-1/2 in wide at the front, each 2 in longer than the shoe. Shape the front ends as in his figure.
Materiais para este passo:
Tábua de madeira de lei1 peçaFerramentas necessárias:
Serrote
Serra de recortes
Plaina manual
Lápis
Fita métrica4
4
Assemble each skate
Assemble each skate
Nail the top edges of a pair of runners to the underside of a board 4 in wide, at its edges. Fasten a block 2 in wide between the runners at the rear and one 1 in wide in front. Bore the runners and put two bolts through, one just behind the front block and one in front of the rear block.
Materiais para este passo:
Tábua de madeira de lei1 peça
Pregos1 peça
Parafuso de carroçaria2 peçasFerramentas necessárias:
Serrote
Martelo
Berbequim de mão5
5
Fit the corner pieces and straps
Fit the corner pieces and straps
Fasten four triangular pieces on top, one at each corner, so the heel and toe of the shoe fit between them; if you like, nail a crosspiece in front of the heel. Attach straps to the sides to fasten the skate to the shoe. Make the second skate the same.
Materiais para este passo:
Tábua de madeira de lei1 peça
Pregos1 peça
Correia de couro2 peçasFerramentas necessárias:
Serrote
Martelo
Berbequim de mão6
6
Troubleshooting
Troubleshooting
Wooden skate troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "Skates Made of Wood" by F. E. Kennar, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 30). The scan says hardwood boards; the Gutenberg text drops "hardwood". He gives no sizes for the bolts, straps or corner pieces. The tools and metric figures are ours.
Materiais
4- 1 peçaReferência
- 2 peçasReferência
- 2 peçasReferência
- 2 peçasReferência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


