ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Boy Scout Slip-on Sweater (1917)
Tex

Criado por

Tex

20. novembro 2026FO
4
0
0
0
0

Boy Scout Slip-on Sweater (1917)

Elsa Barsaloux's slip-on sweater for the Boy Scout (1917): garter stitch, knitted from the back over the shoulders to the front, ribbed cuffs, a long collar sewn down the fronts, a pocket with a crocheted button. The 1917 directions plus sizes 8 to 16 years on one card.
Intermediário
About 4 weeks of evenings

Instruções

1

Print the pattern card

One page (A4 or US Letter): the 1917 directions word for word and a table for ages 8, 10, 12-14 and 16.
Arquivo de designPDFCC0 - Free

Materiais para este passo:

PapelPapel1 folha

Ferramentas necessárias:

Impressora de jato de tintaImpressora de jato de tinta
2

Knit the body

Gauge 96 stitches = 41 cm in garter stitch. Back from the bottom, decrease 5 each side for the armholes, shoulders over the top with the back neck bound off, increase each shoulder to 32 (12-14 years; card for other sizes), cast on 32 at the centre front and knit the front down to the back's length.

Materiais para este passo:

Meada de lãMeada de lã680 g (6 hanks, 12-14 years)

Ferramentas necessárias:

Agulhas de tricôAgulhas de tricô
Fita métricaFita métrica
3

Sleeves, collar, pocket and button

Sleeves in garter stitch with the cuffs ribbed k 1, p 1 in rounds on four fine needles. Collar strip and pocket with its buttonhole as on the card. Crochet the button cover over the mould. Sew up sides and sleeves, set the sleeves in, sew the collar round the neck and down the fronts.

Materiais para este passo:

Molde de botãoMolde de botão1 peça

Ferramentas necessárias:

Agulhas de tricôAgulhas de tricô
Agulha de crochêAgulha de crochê
Agulha grande de tapeçariaAgulha grande de tapeçaria
TesouraTesoura

Materiais

3
  • 1 folha
    Referência
  • 680 g (6 hanks, 12-14 years)
    Referência
  • Referência

Ferramentas necessárias

6

Ficheiros de design

1

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...