Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Brass Faucet Water Aspirator for Fast Vacuum Filtering (Boy Mechanic, 1915)
Charlie

Criado por

Charlie

14. novembro 2026DE
5
0
0
0
0

Brass Faucet Water Aspirator for Fast Vacuum Filtering (Boy Mechanic, 1915)

A water-jet vacuum pump that screws onto a tap: water rushing down a 3/4 in brass tube past a deflector plate sucks air through a 1/4 in side tube, pulling a vacuum in a corked bottle so liquids filter through the funnel far faster.
Intermediário
Two hours

Instruções

1

Read the Boy Mechanic

"Turn on the faucet, and it will be found that the time required to filter any liquid will be greatly reduced."
2

Cut the tubes

Cut brass tube 7 in long and 3/4 in outside, and another 3 in long and 1/4 in outside. Drill a hole in the side of the large tube about 3 in from one end so the small tube fits it very tightly.

Materiais para este passo:

Tubo de latãoTubo de latão1 peça

Ferramentas necessárias:

Serra de arco para metaisSerra de arco para metais
Berbequim de mãoBerbequim de mão
3

Fit the deflector

Saw a slot diagonally across the large tube from one side to the centre (A) and fit a piece of sheet brass tightly in it, placed so the small tube empties directly against it. Solder the plate and the small tube in.

Materiais para este passo:

Chapa de latãoChapa de latão1 peça
Solda de estanho-chumboSolda de estanho-chumbo1 peça

Ferramentas necessárias:

Serra de arco para metaisSerra de arco para metais
Ferro de soldarFerro de soldar
4

Fit to the tap

Thread the upper end of the large tube inside to screw onto the faucet, or solder on a garden-hose style coupling.

Materiais para este passo:

Solda de estanho-chumboSolda de estanho-chumbo1 peça

Ferramentas necessárias:

Jogo de machos e cossinetesJogo de machos e cossinetes
Ferro de soldarFerro de soldar
5

Set up the filter

Seal a glass tube and the filter funnel into the cork of a large bottle with melted paraffin. Join the small brass tube to the glass tube with rubber hose. Fold the filter paper so it sticks tight to the funnel.

Materiais para este passo:

Garrafas de vidro com rolhasGarrafas de vidro com rolhas1 peça
RolhasRolhas1 peça
Tubo de vidroTubo de vidro1 peça
Funil de vidro com hasteFunil de vidro com haste1 peça
ParafinaParafina1 peça
Mangueira de borrachaMangueira de borracha1 peça
Papel de filtroPapel de filtro1 peça
6

Use

Turn on the tap moderately: too much water makes the suction strong enough to puncture the filter paper.
7

Troubleshooting

Aspirator troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), pp. 146-147 (checked on the archive.org scan boymechanicbook200chic2). The trap-bottle and implosion notes are ours.

Materiais

10

Ferramentas necessárias

4

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...