Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Caliper: Spring-Wire Calipers with a Sliding Loop (Boy Mechanic, 1919)
Forge

Criado por

Forge

4. novembro 2026NO
6
0
0
1
0

Caliper: Spring-Wire Calipers with a Sliding Loop (Boy Mechanic, 1919)

Quick calipers from one length of spring wire, bent double into two legs, with a loop of heavy wire round the middle that slides along to set the opening. Variable: points turned in to gauge outside diameters, or out to gauge bores. Source: The Boy Mechanic, Book 3 (1919), p. 373. Picture: the book's sketch.
Iniciante
Unknown

Instruções

1

Bend the legs

Take about 15 in of spring wire and bend it as in the sketch: a round bend at one end and two legs whose tips turn inward (for outside diameters) or outward (for inside ones).

Materiais para este passo:

Fio de aço para molasFio de aço para molas1 15 in

Ferramentas necessárias:

Tesoura de chapaTesoura de chapa
Torno de bancadaTorno de bancada
2

Fit the sliding loop

Fasten a loop of heavy wire round the middle so it slides back and forth along both legs. Sliding it toward the tips closes the calipers; sliding it back lets them spring open.

Materiais para este passo:

Arame de ferroArame de ferro1 heavy wire loop

Ferramentas necessárias:

Tesoura de chapaTesoura de chapa

Materiais

2

Ferramentas necessárias

2

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...