Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Carbon as Pure Graphite: Coke and Sand Heated round a Coke Core in an Electric Furnace (Acheson, US 568,323)
Charlie

Criado por

Charlie

1. novembro 2026DE
10
0
0
0
0

Carbon as Pure Graphite: Coke and Sand Heated round a Coke Core in an Electric Furnace (Acheson, US 568,323)

Acheson found that carbon heated on its own hardly turns to graphite, but carbon first bound to silicon does. Coke and sand packed round a coke core form silicon carbide when the current heats the core; hotter still, the silicon boils away and the carbon is left as pure graphite, which grows outward as the core. Result: pure carbon in its graphite form, sorted like native graphite. Source: E. G. Acheson, US patent 568,323 (1896), pp. 1-3 and drawing (shown above). The furnace runs at hundreds of volts and up to 1000 amperes.
Avançado
2 days

Instruções

1

Mix the charge

Grind and mix powdered coke, sand, salt and sawdust thoroughly, the coke about half the weight (50 parts coke to 50 parts silica and other materials).

Materiais para este passo:

Coque metalúrgicoCoque metalúrgico50 parts

Ferramentas necessárias:

AreiaAreia
Cloreto de sódio (sal)Cloreto de sódio (sal)
SerraduraSerradura
Almofariz e pilãoAlmofariz e pilão
2

Build the furnace

Build a furnace of firebrick with carbon electrodes through the two end walls. Lay a core of granular coke between the electrodes (Acheson's was 7 ft long by 4 in wide) and pack the mixture all round it.

Materiais para este passo:

Coque metalúrgicoCoque metalúrgico1 granular, for the core

Ferramentas necessárias:

Tijolos refratáriosTijolos refratários
Elétrodo de grafiteElétrodo de grafite
3

Run the current

Turn on the current, at first about 650 V and 50 A. The core heats, and silicon carbide forms round it; as the heat rises further the carbide breaks up, silicon goes off as vapour and graphite is left, carrying more current. Near the end it is about 100 V and 1000 A. Stop before the graphite reaches the walls. Ours: a step-down transformer as the supply.

Ferramentas necessárias:

Transformador AbaixadorTransformador Abaixador
Elétrodo de grafiteElétrodo de grafite
4

Take out the graphite

When cool, separate the graphite from the core and the unchanged mixture, and grade it like native graphite.

Ferramentas necessárias:

Almofariz e pilãoAlmofariz e pilão

Materiais

1

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...