ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Charcoal Air Furnace for Crucibles, Drawn by a Chimney
Forge

Criado por

Forge

14. outubro 2026NO
27
0
0
0
0

Charcoal Air Furnace for Crucibles, Drawn by a Chimney

The chemist's furnace for melting in crucibles needs no bellows: a firebrick box closed on every side, air entering only under the grate, and a tall chimney to draw it through the burning charcoal. George Fownes (1856) describes it; a sliding damper in the flue sets the heat, from dull red upward. The picture: a 16th-century assay workshop woodcut with wind furnaces, one on a tripod, for melting silver in crucibles (Deutsche Fotothek).
Intermediário
Two days, plus drying

Instruções

1

Fireclay mortar

Mix fireclay and fine sand with water to a stiff, smooth mortar (our mix: about one part clay to one of sand).

Materiais para este passo:

Argila refratáriaArgila refratária10 kg
Areia finaAreia fina10 kg
ÁguaÁgua8 litros

Ferramentas necessárias:

BaldeBalde
Colher de jardineiroColher de jardineiro
2

Ash pit and grate

Lay a level firebrick base and build a low ash pit with an opening at the front. Forge bars from wrought iron rod and set them across the top as the grate, a finger's width apart.

Materiais para este passo:

Tijolos refratáriosTijolos refratários20 peças
Vergalhão de ferro forjadoVergalhão de ferro forjado2 m

Ferramentas necessárias:

Colher de jardineiroColher de jardineiro
Nível de bolhaNível de bolha
Forja de ferreiroForja de ferreiro
Martelo de pena transversalMartelo de pena transversal
3

Fire box

Build a square box of firebricks on the grate, wide enough for a crucible with a hand's width of charcoal all round, and tall enough to cover it. Joint every brick thinly with the fireclay mortar.

Materiais para este passo:

Tijolos refratáriosTijolos refratários40 peças

Ferramentas necessárias:

Colher de jardineiroColher de jardineiro
Nível de bolhaNível de bolha
4

Flue, chimney and damper

Lead a flue out near the top into a tall chimney pipe. Fit an iron sliding plate across the flue as a damper. Close the top with a loose firebrick lid.

Materiais para este passo:

Tubo de chaminéTubo de chaminé1 peça
Chapa de ferro (martelada)Chapa de ferro (martelada)1 peça

Ferramentas necessárias:

Colher de jardineiroColher de jardineiro
5

Dry and first fire

Let the mortar dry for days, then light a small charcoal fire and raise it slowly over an hour or two so the joints do not crack.

Materiais para este passo:

Carvão vegetalCarvão vegetal10 kg

Ferramentas necessárias:

Luvas resistentes ao calorLuvas resistentes ao calor
6

Draught from the chimney

A carregar o notebook Jupyter…
7

Limits

The principle and the damper are Fownes's; the sizes, the mortar mix and the draught formula's working figures are ours. Charcoal fires make carbon monoxide: work outdoors or under a good chimney.

Materiais

8

Ferramentas necessárias

6

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...