Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Clear Laminating Film: Polyvinyl Butyral Plasticised with Tributyl Citrate and Extruded (Nason, Monsanto, US 2,126,028)
Charlie

Criado por

Charlie

31. outubro 2026DE
11
0
0
0
0

Clear Laminating Film: Polyvinyl Butyral Plasticised with Tributyl Citrate and Extruded (Nason, Monsanto, US 2,126,028)

The clear layer inside safety glass must stay rubbery from frost to summer heat and stick to glass on its own. Nason softened polyvinyl butyral with tributyl citrate, which stays in the film far better than the usual phthalate. Result: a clear, rubbery, non-tacky film that bonds glass under heat and pressure without glue. Source: Nason, US 2,126,028 (Monsanto, 1938). He used Butvar resin; ours is the polyvinyl butyral we make. Not given: film thickness. Picture drawn by Youblob.
Intermediário
1 day

Instruções

1

Weigh resin and plasticiser

Take 100 parts of polyvinyl butyral resin and 50 parts of tributyl citrate (Nason: 50 or more parts mix freely).

Materiais para este passo:

Resina de polivinilbutiralResina de polivinilbutiral100 parts
Citrato de tributiloCitrato de tributilo50 parts

Ferramentas necessárias:

Balança de pratosBalança de pratos
2

Mix with slight warming

Work them together with slight warming in a mixer (or dissolve both in acetone and let it evaporate) until the mass is even.

Ferramentas necessárias:

Tanque de mistura fechadoTanque de mistura fechado
Placa de aquecimentoPlaca de aquecimento
3

Extrude into sheet

Sheet the plasticised resin, for example by extrusion under pressure. Ours: a plastic extruder with a slot die. Thickness: not given.

Ferramentas necessárias:

Extrusora de plásticoExtrusora de plástico
Matriz de extrusãoMatriz de extrusão
4

Check the film

The film should be clear, moderately soft and rubbery, but not tacky. Pressed hot between glass sheets it bonds without adhesive.

Ferramentas necessárias:

Placa de aquecimentoPlaca de aquecimento

Materiais

2

Ferramentas necessárias

5

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...