Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Combination Lock: a Five-Disc Drawer Lock (Boy Mechanic, 1915)
Forge

Criado por

Forge

4. novembro 2026NO
16
0
0
0
0

Combination Lock: a Five-Disc Drawer Lock (Boy Mechanic, 1915)

A keyless lock fitted inside a drawer front: five brass discs on a pin, turned by pins from a knob and dial outside. When the notches line up the latch drops; turning back raises it into its keeper. The combination is changed by moving the pins in the discs. Source: The Boy Mechanic, Book 2 (1915), p. 169. Picture: Figs. 1-2 of the book.
Intermediário
Unknown

Instruções

1

Cut the five discs

Cut five discs of sheet brass about 1/16 in thick and 1 1/2 in across. Drill each for a driving pin 15/32 in from the centre and press the pin in. Notch discs C, D and E for the latch; shape disc B as a cam to lift the latch into its keeper; leave disc A plain with only its pin (Fig. 1).

Materiais para este passo:

Chapa de latãoChapa de latão1 discs
Metal desconhecidoMetal desconhecido1 driving pins

Ferramentas necessárias:

Compasso de pontasCompasso de pontas
Tesoura de chapaTesoura de chapa
Lima para metalLima para metal
Berbequim de mãoBerbequim de mão
MarteloMartelo
2

Mount the discs

Inside the drawer front fit a U-shaped metal bracket F carrying a 1/4 in pin G. Thread the discs on it with rubber washers H to M between them so they don't turn too freely. Fix disc A tight on the end of a 1/4 in rod N that passes out through the front.

Materiais para este passo:

Chapa de açoChapa de aço1 U-bracket F
Varão de aço macioVarão de aço macio1 pin G, rod N
Material desconhecidoMaterial desconhecido5 rubber washers

Ferramentas necessárias:

Berbequim de mãoBerbequim de mão
Arco de pua e brocaArco de pua e broca
Tesoura de chapaTesoura de chapa
3

Fit knob, dial and latch

Make the knob of two pieces of wood screwed together with a pointer between them, fit it on rod N with a washer against the drawer. Paste on a paper dial with division marks and numbers. Fit the latch T in a U-shaped metal piece U inside the drawer end so its heel rests on the disc edges, with its keeper above. To find the combination, open the drawer and turn the knob until each notch comes under the latch heel, noting the number under the pointer each time.

Materiais para este passo:

Bloco de madeira duraBloco de madeira dura2 knob
Metal desconhecidoMetal desconhecido1 pointer, latch, keeper
Anilha planaAnilha plana1 peça
PapelPapel1 dial
Chapa de açoChapa de aço1 U-piece
Parafusos para madeiraParafusos para madeira1 peça

Ferramentas necessárias:

Chave de fendasChave de fendas
Tesoura de chapaTesoura de chapa

Materiais

9

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...