Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Two-Part Soap Dish: a Studded, Drained Tray on a Scallop-Edged Base That Lets Air Under the Soap (Conkling, 1901)
Clay

Criado por

Clay

13. novembro 2026DK
3
0
0
0
0

Two-Part Soap Dish: a Studded, Drained Tray on a Scallop-Edged Base That Lets Air Under the Soap (Conkling, 1901)

Allen Conkling of Chicago received US 679,110, dated 23 July 1901, for a soap dish in two parts that keeps soap dry. The upper tray holds the soap on little rounded studs above drain holes; it sits on a lower dish whose edge is scalloped, so air flows in underneath, up through the holes and round the soap. The lower part lifts off to be cleaned. We make it from stoneware clay. All sizes are ours.
Iniciante
About 3 hours plus drying and firing

Instruções

1

Shrinkage

A carregar o notebook Jupyter…
2

Read US 679,110

"A circulation of air is thus established through the spaces at the edges of the lower part, thence through the drain-openings in the outer or upper part to and around the soap, which soon dries the same after use."
3

Make the upper tray

Roll a slab of stoneware clay about 6 mm thick (ours). Cut the tray's bottom and a strip for its retaining wall, score and slip the joins and join them. Roll small balls, flatten them slightly and join them to the bottom inside as his rounded studs A2. Pierce drain holes A3 between the studs with a tool.

Materiais para este passo:

Argila de grésArgila de grés1 peça

Ferramentas necessárias:

Rolo da massaRolo da massa
Conjunto de ferramentas de oleiroConjunto de ferramentas de oleiro
Ferramenta de riscar barroFerramenta de riscar barro
4

Add the flange

Join a narrow strip round the underside of the tray, a little in from its edge, so it hangs down as his flange A4 and will sit over the lower part's rim.

Materiais para este passo:

Argila de grésArgila de grés1 peça

Ferramentas necessárias:

Conjunto de ferramentas de oleiroConjunto de ferramentas de oleiro
Ferramenta de riscar barroFerramenta de riscar barro
5

Make the lower part

Make a shallow dish of the same outline, sized so its rim fits inside the tray's flange. Cut scallops into the top of its rim, his B', so there are gaps for air when the tray sits on it.

Materiais para este passo:

Argila de grésArgila de grés1 peça

Ferramentas necessárias:

Rolo da massaRolo da massa
Conjunto de ferramentas de oleiroConjunto de ferramentas de oleiro
Ferramenta de riscar barroFerramenta de riscar barro
6

Dry, glaze and fire

Let both parts dry slowly under loose cover, fire them to bisque, dip them in glaze with tongs (wipe the glaze off the rim and flange where they touch the kiln shelf), and glaze-fire them, both as the clay and glaze makers specify.

Materiais para este passo:

Vidrado transparenteVidrado transparente1 peça

Ferramentas necessárias:

Forno cerâmicoForno cerâmico
Conjunto de acessórios de fornoConjunto de acessórios de forno
Tenaz de mergulhoTenaz de mergulho
7

Use it

Set the tray on the lower part with the flange over the rim. Water from the soap drains through the holes into the lower part; lift the tray off to empty and clean it.
8

Troubleshooting

Soap dish troubleshooting.

Flow

Loading...
9

History and honest limits

**Allen Conkling** of Chicago, US 679,110, dated 23 July 1901, filed 7 March 1901. He claimed "a soap-dish formed of two parts, the upper part forming a supporting-tray having a retaining-wall, perforated bottom and studs above the same, and a retaining-flange extending downward from the bottom of said upper part to fit the upper edge of the lower part, and a lower part having an upper edge scalloped". He made the parts to be molded and names no material; the stoneware, slab-building, glaze, firing and all sizes are ours.

Materiais

2

Ferramentas necessárias

6

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...