Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Crucible Furnace: the Brass Founder's Sunk Coke Air Furnace (Larkin, 1907)
Forge

Criado por

Forge

3. novembro 2026NO
14
0
0
1
0

Crucible Furnace: the Brass Founder's Sunk Coke Air Furnace (Larkin, 1907)

The brass founder's crucible furnace: a firebrick-lined pit sunk below the floor, fired with hard coke on an iron grating over the ash-pit, closed by a dome-shaped iron cover and drawn by a flue with a damper. The crucible sits on a firebrick in the middle of the fire, lidded, with coke banked round it, until the metal is melted. Result: a coke-fired crucible furnace for melting brass and bronze. Source: J. Larkin, The Practical Brass and Iron Founder's Guide (1907), pp. 96-99. Unknown: all sizes. Picture drawn by Youblob.
Intermediário
Unknown

Instruções

1

Build the pit

Sink the furnace below the floor. Line the inside with firebricks set in fireclay; use pure clay (white, opaque, oily to the touch), since iron oxide, magnesia, lime or black lead in brick or clay shortens the furnace's life. Close the ash-pit at the bottom with a hinged iron grating. Not given: sizes.

Materiais para este passo:

Tijolos refratáriosTijolos refratários1 lining
Argila refratáriaArgila refratária1 jointing
Metal desconhecidoMetal desconhecido1 hinged grating

Ferramentas necessárias:

Dimensões desconhecidasDimensões desconhecidas
2

Fit the cover and flue

Make a dome-shaped cover for the furnace top of cast or wrought iron. Lead a flue from the furnace with a damper in it. Not given: the flue size or height.

Materiais para este passo:

Metal desconhecidoMetal desconhecido1 dome cover, damper
Tubo de chaminéTubo de chaminé1 flue

Ferramentas necessárias:

Dimensões desconhecidasDimensões desconhecidas
3

Fire it and melt

Burn hard coke broken to lumps the size of a fist. Heat the crucible bottom upwards in the fire, lift it out with the tongs, turn it upright and bed it on a slab of fireclay or a firebrick, put on its lid and bank the fire round it. Put the metal in, close the cover and open the damper for draught until the metal is melted. Black-lead crucibles last longer; clay ones must first be hardened by slowly raising their temperature.

Ferramentas necessárias:

Coque metalúrgicoCoque metalúrgico
Cadinho de grafite e argilaCadinho de grafite e argila
Tenaz para cadinhoTenaz para cadinho

Materiais

4

Ferramentas necessárias

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...