Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Crutch: a Split Broom-Handle Crutch (Boy Mechanic, 1913)
A crutch made to the user's own length from a broom handle: split, soaked and spread into a Y, with a riveted hand grip and a shaped top piece nailed across for the armpit.
Make two for a pair.
Source: The Boy Mechanic, Book 1 (1913), p. 369. Picture: Figs. 1-3 of the book.
Iniciante
Unknown
Instruções
1
1
Split and soak the handle
Split and soak the handle
Split a broom handle with a rip saw to within 1 ft of one end (Fig. 1). Soak it in water for three days so the halves will bend.
Materiais para este passo:
Cavilha de madeira1 broom handleFerramentas necessárias:
Serrote de corte ao fio
Água2
2
Fit the grip
Fit the grip
Cut a grip as long as the hand is wide and bore it through the centre to take No. 10 wire. Set it between the two halves at the right height for the arm, run the wire through both halves and the grip, and rivet it over (Fig. 2).
Materiais para este passo:
Cavilhas de madeira dura1 grip
Arame de ferro1 No. 10Ferramentas necessárias:
Serrote
Arco de pua e broca
Tesoura de chapa
Martelo3
3
Nail on the top piece
Nail on the top piece
Cut a top piece shaped as at A, Fig. 3, and nail it across the upper ends of the two halves.
Materiais para este passo:
Tábua de pinho1 top piece
Pregos1 peçaFerramentas necessárias:
Serrote
MarteloMateriais
5- 1 broom handleReferência
- 1 gripReferência
- 1 No. 10Referência
- 1 top pieceReferência
- 1 peçaReferência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
