ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Women's Doric Dress, Made to Measure (Abrahams, 1908)
The simple Doric dress of Greek women, after Ethel Abrahams' Greek Dress (1908): one oblong of wool, folded over at the top, pinned on the shoulders and girded at the waist. The cut size comes from your own height and elbow span.
Iniciante
About 2 hours
Instruções
1
1
Draft your pattern
Draft your pattern
Enter your height and your elbow span (elbow to elbow, arms held out level with the shoulders) in your Wardrobe, or use Abrahams' own example, and draft: you get the size of the one oblong to cut.
Ferramentas necessárias:
Fita métrica2
2
Read Greek Dress, ch. III
Read Greek Dress, ch. III
"It consists of a large oblong piece of material, in length about 1 ft. more than the height of the wearer, in width about twice the distance from elbow to elbow when the wearer's arms are held out horizontally at shoulder level."
3
3
Cut the oblong
Cut the oblong
Cut one oblong of wool cloth to the width and length from step 1.
Materiais para este passo:
Pano de lã acabado de tecer1 width x length from step 1Ferramentas necessárias:
Fita métrica
Tesourão4
4
Fold over the top
Fold over the top
Fold the upper edge over to a width of about 1 ft (30 cm). "The additional foot in height is used up by folding the upper edge over so that the material is double from neck to waist."
Ferramentas necessárias:
Fita métrica5
5
Mark the shoulder points
Mark the shoulder points
Along the folded top edge, mark the points f, e, e' and f' of her Fig. 9, so that a' f, f e, e' f' and so on are each about one sixth of the whole width. She notes that "a better effect is produced if the width of stuff e' f', which covers the back of the neck, is shorter than the other sections." Ours: mark them with pins.
Ferramentas necessárias:
Fita métrica
Alfinetes de costura6
6
Pin it on the shoulders
Pin it on the shoulders
Fold the dress round the body and pin it on the shoulders at the points e e' and f f'. "The part which covers the back is drawn slightly forward over the front, so that there are four thicknesses of material where the pins are inserted."
Materiais para este passo:
Fíbulas2 peças7
7
Gird it at the waist
Gird it at the waist
Gird the dress at the waist (her points g and h) and draw any superfluous length up over the girdle.
Materiais para este passo:
Correia1 peça8
8
Close the side, or leave it open
Close the side, or leave it open
The side is "sometimes along the whole length ac, bd, sometimes only along the length from the waist to the feet ... sometimes it is left open, being held in place only by the girdle." Choose one; if you sew it, use a plain seam (ours: linen thread).
Materiais para este passo:
Fio de linho1 peçaFerramentas necessárias:
Conjunto de agulhas de costura9
9
History and honest limits
History and honest limits
From **Greek Dress** by Ethel B. Abrahams, John Murray, London, 1908 (archive.org greekdressstudyo00abra), chapter III, "Doric", pp. 42-45 and Fig. 9: "The simple Doric dress mentioned by Herodotus as being universally worn by Greek women down to the sixth century". Later, she writes, the dress became more ample and the shoulder pins were "no longer being an exact sixth of the whole width of the dress"; the Caryatids of the Erechtheum (the picture) are among her "most perfect examples". She calls it "the coarser woollen Doric garment" (p. 60). Ours: the metric figures, the thread, marking with pins. The older Greek chiton blueprint shows a two-piece construction.
Materiais
4- 1 width x length from step 1Referência
- 2 peçasReferência
- 1 peçaReferência
- 1 peçaReferência
Materiais de Blueprints conectados
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.





